Xerox P1210UG-8 manual Push back on the Simm until it clicks into

Page 24

P1210UG-8 6/30/00 3:59 PM Page 1.22

I N S T A L L I N G O P T I O N A L M E M O R Y

4	Push back on the SIMM until it clicks into
	place. (Make sure the SIMM is secured in

place by the metal clips.)

5

6

Replace the side cover and tighten the two outer screws.

Reconnect the power cord and printer cable. Turn the power on.

7Print a configuration sheet (hold down the print button until all lights blink, then release). Confirm the new memory value on your sheet.

1.22

U s e r G u i d e

Image 24

Contents DocuPrint P1210 P1210UG-8 6/30/00 359 PM G l i s h B L E O F C O N T E N T SP a C K I N G UnpackingI N T E R C O M P O N E N T S Rear ViewN N E C T I O N S / C O N T R O L P a N E L R T R I D G E Installation ES PT ZHShake the print cartridge from side to side A D I N G P a P E R Beneath the metal corner guide. If using Install I N G S O F T W a R E CD ContentsInstallation for Macintosh Select Install I N G S O F T W a R E I N T D R I V E R F E a T U R E S MacL T I P U R P O S E T R a Y P R I N T I N G Paper or 10 envelopes for automatic feeding I N T E R Specification S Specification and DescriptionTroubleshooting Problem Possible Cause Things to tryClearing Paper Jams Inside the Printer EN FR ES Gently remove the jammed paper. Refer to Install I N G O P T I O N a L M E M O R Y Push back on the Simm until it clicks into T T I N G M O R E I N F O R M a T I O N Laser Safety I N T E R C E R T I F I C a T I O N SN G U a G E codes Code Language