P1210UG-8 6/30/00 3:59 PM Page 1.4
C O N N E C T I O N S / C O N T R O L P A N E L
Connections
1
USB Cable Connect cable. (Sold separately)
or
Parallel Cable
Connect cable.
Caution: Turn off your computer before connecting your printer cable or power cord.
2AC Power Cord
Connect to your printer to a properly grounded outlet. Turn the power on.
1.4
Control Panel
Error Light
Blinking: Insufficient memory
On: Cover open, cartridge not installed or not seated properly
On with Paper Light: Paper jam
Paper Light
On: Out of Paper
On with Error Light: Paper jam
Cancel Button
To cancel print job, hold the cancel button until all lights blink, then release.
Print Button
To print a Configuration Sheet, hold the print button until all lights blink, then release.
U s e r G u i d e
Manual Light
On:
Press print button to start job
Data Light
On: Ready to receive data
Slow blink: Receiving data
Fast blink: Printing
Note: When all lights are blinking, this indicates a system error. Turn the power off and then back on to clear. If problem persists, call your local Xerox Helpline.