Samsung HT-WP38 Listening to Radio, Remote Control Unit, Tune in to the desired station

Listening to Radio

You can listen to the chosen band (FM, AM broadcast stations) by using either the automatic or manual tuning operation.

Presetting Stations

You can store up to:

15	FM stations	• FM	Frequency Modulation
15	AM stations	• AM	Medium Wave

ENG

Remote Control Unit

Example: Presetting FM 89.1 in the memory

1 Press TUNER button.

2 Tune in to the desired station.

1Press the TUNER button and select the FM band.

2Press TUNING/CH

to select "89.10".

3 Press the TUNER MEMORY button.

•The selection toggles back and forth between "FM ➝ AM" each time the TUNER button is pressed.

Main Unit

Automatic Tuning 1

Automatic Tuning 2

Manual Tuning

When is pressed, a preset broadcast station is selected.

Press and hold TUNING/CH to automatically search for active broadcasting stations.

Briefly press TUNING/CH to increase or decrease the frequency incrementally.

•Each time the button is pressed, the band switches between "FM ➝ AM".

•Refer to Step 2 on page 63 to automatically or manually tune in to a station.

•“PRGM” flashes in the display.

Press the Function

1button to select the desired band (FM, AM).

2 Select a broadcast station.

Automatic Tuning 1 Press the STOP ( )

button to select

PRESET and then press button to select the preset station.

Automatic Tuning 2 Press the STOP ( ) button

to select "MANUAL" and

then press and hold button to automatically search the band.

4 Press to select preset number.

•You can select between 1 and 15.

5	Press the TUNER	6	To preset another
	MEMORY button		station, repeat
	again.		steps 2 to 5.

•Press the TUNER MEMORY button before ‘PRGM’ disappears from the display.

•‘PRGM’ disappears from the display and the station is stored in memory.

RADIO

Manual Tuning Press STOP ( ) to select MANUAL and then briefly

press to tune in to a lower or higher frequency.

Note	• Up to 15 stations (30 total ; 15FM, 15AM) can be saved in memory.
	If you save more than 15 stations, the oldest station previously saved is removed and a
	new station is stored in its place.

OPERATION

Press MO/ST button to listen in Mono/Stereo.

(This applies only when listening to an FM station.)

63	• Each time the button is pressed, the sound switches between "STEREO" and "MONO".
	• In a poor reception area, select MONO for a clear, interference-free broadcast.

To tune in to a preset station, press remote control to select a channel.

on the

64