DVD Audio Disc Playback Mode
Some
To play back the
Setting the Speaker Mode | ENG |
|
Signal outputs and frequency responses from the speakers will automatically be adjusted according to your speaker configuration and whether certain speakers are used or not.
Press the MENU
1 button while the disc tray is open.
Press Cursor 3 button to move to
‘DVD TYPE’ and then press ENTER button.
Press Cursor 2 button to move to
‘Setup’ and then press ENTER button.
Press Cursor , 4 button to move to
‘DVD VIDEO’ and then press ENTER button.
•Set steps 1 ~ 4 again if you want to switch to DVD AUDIO Play mode.
When Selecting DVD Play Mode:
In Stop mode,
1 press MENU
button.
In the Speaker
3 Setup, press the ENTER button again.
Press Cursor 2 button to move to
‘Audio’ and then press ENTER button.
Press Cursor , ,
4 , buttons to move to the desired speaker and then press ENTER button.
•For C, LS, and RS, each time the button is pressed, the mode switches alternately as follows: SMALL ➝ NONE.
•For L and R, the mode is set to SMALL.
SETUP
Note | • DVD Play mode is set to DVD Audio as factory default setting. |
•DVD VIDEO : set to play the DVD video contents contained on a DVD audio disc.
•DVD AUDIO : set to play the default DVD audio.
SMALL : Select this when using the speakers.
NONE : Select this when no speakers are connected.
DivX (R) registration
•Please use the Registration code to register this player
51 | with the DivX (R) video on demand format. To learn more, | |
go to www.divx.com/vod. | ||
|
Note |
•• Depending on PRO LOGIC and STEREO settings, the speaker mode may vary (see page 61).
52