Listening to Radio
Presetting Stations | ENG |
|
Remote Control Unit
Example: Presetting FM 89.1 in the memory
1Press the FM/XM button to select the FM band.
2 Tune in to the desired station.
1Press the FM/XM button to select the FM band.
Press TUNING/CH | 3 | Press the FM/XM |
2 to select "89.10". | MEMORY button. |
Main Unit
Automatic Tuning 1
Automatic Tuning 2
Manual Tuning
When 
is pressed, a preset broadcast station is selected.
Press and hold TUNING/CH to automatically search for active broadcasting stations.
Briefly press TUNING/CH to increase or decrease the frequency incrementally.
• Refer to Step 2 on page 65 to | • “PRGM” flashes in the display. |
automatically or manually tune in |
|
to a station. |
|
1Press the FUNCTION button to select the FM band.
2 Select a broadcast station.
Automatic Tuning 1 | Press the STOP ( ) |
| button to select |
PRESET and then press 
button to select the preset station.
Automatic Tuning 2 Press the STOP ( 
)
button to select "MANUAL"
and then press and hold 
button to automatically search the band.
Manual Tuning Press STOP (
) to select MANUAL and then briefly
press 
to tune in to a lower or higher frequency.
4 Press 
to select preset number.
•You can select between 1 and 15.
Note | • This unit does not receive |
| AM broadcasts. |
5 |
| Press the FM/XM | 6 |
| To preset another |
| MEMORY button |
| station, repeat | ||
|
| again. |
|
| steps 2 to 5. |
|
|
|
|
|
|
•Press the FM/XM MEMORY button before ‘PRGM’ disappears from the display.
•‘PRGM’ disappears from the display and the station is stored in memory.
RADIO OPERATION
Press MO/ST button to listen in Mono/Stereo.
(This applies only when listening to an FM station.)
To tune in to a preset station, press 
on the remote control to select a channel.
65 | • Each time the button is pressed, the sound switches between "STEREO" and "MONO". | 66 | |
• In a poor reception area, select MONO for a clear, | |||
|
|