PAPER AND OTHER SUPPLIES
Characteristics The paper stock should have the following characteristics:
•
•
•
•
•
Low moisture content (a
Smooth surface
No defects (bent edges, uneven surfaces)
Grain long (parallel with the long side of paper).
Paper is usually fed into the printer with the long side as the leading edge. When you purchase paper, buy
Special stocks Following are some guidelines for choosing and using special materials:
•
•
•
•
•
•
Labels — Must be the type designed for
Load labels with the label side up. You can direct them to any output tray.
Transparencies — Must be the type designed for
Load transparencies with the opaque strip to the right. All printed transparencies are delivered to the sample tray.
As long as they meet your printer’s paper specifications, you can also use:
Tinted paper — Available in a variety of colors, it has many uses, including calling attention to certain printed material, separating special sections, or dividing chapters of a report.
Preprinted paper — May be letterhead, forms, or logos.
Predrilled paper — Has a varying number of holes for use in binders or binder rings. Before loading predrilled paper, fan it to remove loose plugs that could cause paper jams. Load predrilled paper in the printer with holes to the right.
Perforated paper
XEROX DOCUPRINT 92C NPS SYSTEM OVERVIEW GUIDE |