Xerox 2060 manual Job status feedback, Platform Job status capability

Network printing environment

Table 4-1. Clients (Continued)

Client			Protocol;
workstation	Operating	Ethernet	Translation	Job submission
hardware	system	connection	requirements	method
Digital	ULTRIX	Optional	TCP/IP;	Print directly from
Equipment		Ethernet	none	application, or use the
Corporation		interface		lpr command or Xerox
DECstation				Client Software.
Apple	Apple OS	Optional	AppleTalk using	Print directly from
Macintosh		Ethernet	EtherTalk Phase I or	application or use Xerox
		interface	II; none	DocuPrint Print
				Submission Client
				software for the
				Macintosh.
IBM RS/6000	IBM AIX	Standard	TCP/IP;	Print using Xerox Client
			none	Software.
HP/Apollo	HP-UX	Standard	TCP/IP;	Print using Xerox Client
			none	Software.

Job status feedback

	Client workstations display fault messages and additional
	information, such as the status of feeder trays and output bins. If
	properly configured, the workstations may be able to display job
	status, as shown below.
		Table 4-2. Job status feedback
Platform		Job status capability
Sun workstation		Job status and job deletion are available by issuing the appropriate
		command at the command line.
		Job status information is available for jobs submitted using Xerox Client
		Software.
IBM and compatible		Job status and job deletion are available depending on the TCP/IP
personal computers		software installed on the workstation. You must issue the appropriate
		command at the command line.
		Job status information is available for jobs submitted using Xerox Client
		Software.
		Job status information is available using the Novell PCONSOLE utility if
		the printer is configured with a RPRINTER or PSERVER enabled.
Apple Macintosh		Job status information is available at the workstation through AppleTalk.
IBM RS/6000 and HP/		Job status information is available for jobs submitted using Xerox Client
Apollo		Software or Ipstat (native utility).

System Overview Guide 4-5