Xerox 2060 manual

Page 73

Supplies

Duplexing The DocuColor 2060 NPS/IPS prints duplex from all paper trays up to 220 gsm.

The system does not print duplex on media heavier than 220 gsm or larger than 12.6 x 18” / 321.1 x 458.1 mm.

Characteristics The paper stock should have the following characteristics:

•Low moisture content (a paper-to-moisture ratio below 5.7 percent). Paper with higher moisture content may curl and jam.

•Smooth surface

•Moisture-resistant wrapping

•No defects (bent edges, uneven surfaces)

•Grain long (parallel with the long side of paper).

Paper is usually fed into the printer with the long side as the leading edge. When you purchase paper, buy long-grain paper. Make sure the grain is parallel with the long side (long- grain) for the most reliable feeding and stacking.

Special stocks Following are some guidelines for choosing and using special materials. Refer to table 1 to determine if the tray used is capable of handling the special stock.

•Transparencies: Use only the transparencies

recommended: Xerox Removable Paper Stripe: USA and Canada, 3R5765; Xerox Europe, 3R93179.

Load transparencies into tray 3 with the paper stripe side facing DOWN and with the stripe as the leading edge. (The leading edge is the edge that feeds into the printer first.)

•Labels: Must be the type designed for high-speed printers and must meet the specifications described in the section above. Loading instructions are printed on all paper trays.

Load labels with the label side up. You can direct them to any output tray.

•Tinted paper: Available in a variety of colors, it has many uses, including calling attention to certain printed material, separating special sections, or dividing chapters of a report.

•Preprinted paper: May be letterhead, forms, or logos.

System Overview Guide

A-3

Image 73

Contents 721P90540 Version 8.0 October NPS/IPSPage Table of contents Printer components and options Printer controllerNetwork printing environment Ipds printing environmentPage Table of contents System Overview Guide Laser safety SafetyOzone information U. S. only Operation safety U. SOperation safety Europe Electrical supply Operator accessible areasVentilation Before cleaning your product MaintenanceCE mark Europe only Radio and telecommunications equipment directive Europe only For further information Safety Xiv System Overview Guide Introduction ContentsAbout this guide Conventions Related publications Introduction Xviii System Overview Guide Functional overview of the NPS/IPS System overviewSystem component overview Connectivity configurationsNPS/IPS concurrent printing Snmp supportSixth Sense IPP supportSoftware license Image quality Printing considerations for the DocuColor 2060 NPS/IPSImage area Duplex printing No automatic tray switchingColor pages in copiers or other printers Limitations for stock within a jobSystem overview System Overview Guide Printer controller Sun Blade 1000 workstation Printer controller componentsComponents of the printer controller Page Back panel of the printer controller Printer controller software and fonts Page Page Printer components Printer components and optionsCapacity Output trayMessage area Touch screenTabs, buttons, and icons Alert screen Alert screensPrinter control panel with words Printer control panelControl panel buttons Name and symbol FunctionSettings chapter Audio tones Dry Ink cartridges Identifying the internal componentsUpper door Serial number labelPaper Path Transport module paper path Transport module10. Printer paper path Paper path in the printer11. Exit module paper path Exit moduleHigh-capacity feeder Printer options13. Xerox DocuColor 2060 NPS/IPS high-capacity feeder 14. High-capacity stacker High-capacity stackerHigh-capacity stacker stapler High-capacity stacker modesHigh-capacity stacker stapler modes 15. High-capacity stacker stapler HcssPrinter components and options System Overview Guide Client workstations and system software Network printing environmentSubmitting print jobs Client softwareCommunicating with the network Client Protocol Workstation Operating Ethernet ClientsJob submission Hardware System ConnectionPlatform Job status capability Job status feedbackToken Ring Ethernet LANMultiple network connectivity Network printing environment System Overview Guide Host connectivity Ipds printing environmentHost environments Printing system channel-attached configuration Printing system TCP/IP configuration Channel interface-channel-attached systems only Channel interface board and channel cable connector boxLine mode data streams Software features for IpdsIpds data stream IM Image IMD1Overstrike, underscore, subscript, and superscript Trace facilityColor image support Background color for OCA colorsOutline font support Bi-level Ioca colorsIpds printing environment System Overview Guide Paper and other throughput stocks SuppliesSelecting paper Table A-1. Paper guidelines Page Paper care Perforated paperFigure A-1. Storing paper correctly Supplies Fuser lubricant Other suppliesCentigrade Cartons HoursTable A-3. Developers for use with colored inks DeveloperDiskettes TapesFonts Consumable supplies tablesPaper and special stocks tables Description Part number Paper Table A-4. Stocks list for DocuColor 2060 NPS/IPS printerDescription Part number Labels gummed Description Part number TransparenciesCover stock Table A-5. Items supplied with DocuColor 2060 NPS/IPS Supplies listsTable A-6. Additional supplies for DocuColor 2060 NPS/IPS Ordering supplies Page Table A-7. Supplies checklist for DocuColor 2060 NPS/IPS DVD-ROM IndexLAN Requirements SafetyTape Workstations

Related manuals

Manual 218 pages 11.81 Kb