Xerox 2060 manual Other supplies, Fuser lubricant, Centigrade, Cartons Hours

Supplies

Table A-2. Paper conditioning: Recommended temperature differences between storage and operating areas

	Temperature differences between storage and
	operating areas
	Fahrenheit
	10o	15o	20o	25o	30o	40o	50o
	Centigrade
	5.5o	8.5o	11o	13o	17o	22o	28o
Cartons	Hours
1	4	8	11	14	17	24	34
5	5	9	12	15	18	25	35
10	8	14	18	22	27	38	51
20	11	16	23	28	35	48	67
40	14	19	26	32	38	54	75

Example: (See the shaded rows in the table above.) If you want to move ten cartons of paper from a storage area with a

temperature of 90 oF to an operating area with a temperature of

75 oF (a 15o difference), you should do so at least 14 hours before using the paper.

Other supplies

This section describes the supplies other than paper that are necessary for installation and afterward. Your sales representative will help you place your initial supply order.

Fuser lubricant

Fuser lubricant is a consumable item required by the printer. You should keep at least two boxes (each box contains two tubes) on hand for installation by the service representative. The consumption rate of Xerox fuser lubricant is approximately one tube per 50,000 pages. For product information, refer to the consumable supplies table in this appendix.

System Overview Guide A-7