Stereo / Mono switching
If the FM radio station being listened to has a weak signal, some hiss may be audible. It is possible to reduce this hiss by forcing the radio to play the station in mono rather than stereo.
1.Press the Mode button as needed to select the FM radio mode display and tune to the required FM station as previously described.
2.Press the Menu button to enter the FM menu.
3.Rotate the Tuning/Select control until 'Audio setting' is highlighted on the display. Press the Tuning/Select control to enter the audio setting mode.
The current setting is indicated with an asterisk.
4.To switch to mono in order to reduce the hiss from a weak FM signal rotate the Tuning/Select control until 'YES' is highlighted. Press the Tuning/Select control to confirm the setting.
Alternatively, to return to the normal automatic 'stereo or mono' mode rotate the Tuning/Select control until 'NO' is highlighted. Press the Tuning/Select control to confirm the setting.
5.Press the Menu button to return to the normal FM mode display.
FM Radio
1
2,5
If you need any further advice, please call our Technical Helpline on 020 8758 0338 | 68 |