Setting up your My EQ profile
If you find the preset equaliser functions not to your liking, you may set up a custom treble and bass setting as follows:
1.Follow steps
2.Rotate the Tuning/Select control until 'My EQ profile setup' is highlighted on the display. Press the control to enter the adjustment mode.
3.To adjust the bass level rotate the Tuning/Select control until 'Bass' is highlighted on the display. Press the control to enter the adjustment mode and rotate the control until the desired level (between
4.To adjust the treble level rotate the Tuning/Select control until 'Treble' is highlighted on the display. Press the control to enter adjustment mode and rotate the control until the desired level (between
5.Press the Back button and the display will prompt you to save the changes. If you wish to save the changes rotate the control to highlight 'YES'. If you do not wish to save the changes highlight 'NO'. Press the Tuning/Select control to enter the selection.
6.To use the 'My EQ' profile rotate the Tuning/Select control until 'My EQ' is highlighted, and then press the control to make the selection.
To quickly cancel the effect of the 'My EQ' profile rotate the Tuning/Select control until 'Normal (Flat)' is highlighted on the display and press the control to select. The treble and bass settings will be remembered for the next time that you wish to use the 'My EQ' setting.
Display and Audio
4
If you need any further advice, please call our Technical Helpline on 020 8758 0338 | 80 |