Xerox 4220/MRP, 4230/MRP, 4219/MRP manual Checking the interface configuration, Size, Print language

Page 29

OVERVIEW AND PRINTER SETUP

Page size

ST1

The default page size is set with a 2-pin jumper (ST1). The jumper is turned OFF by placing the jumper shunt over only 1 pin, as shown in the illustration at left. The jumper is turned ON by covering both pins. Turning the jumper OFF sets the page size default to U. S. (8.5x11). Turning the jumper ON sets the page size default to European A4 (8.27x11.69).

This figure shows the location of the page size jumper on the coax interface card. DO NOT move the jumper shunt. The jumper should be changed only by your service representative.

Print language

ST2

The default print language is determined by the placement of a shunt over a 3-pin jumper (ST2). The illustration at left shows the jumper configuration. The printer will work properly only with the jumper in the standard configuration. The shunt should always be placed over the two pins closest to the edge of the interface card. DO NOT move the jumper shunt. The jumper should be changed only by your service representative. This figure shows the location of the print language jumper on the coax interface card

Printer address and emulation

Coaxial default settings for the printer emulation can only be set through the FSL Function. Refer to Chapter 3 for instructions and a complete list of coax printers the interface can emulate.

Checking the interface configuration

You can check the configuration of your interface by using one of the following methods:

·Printing the Interface Configuration Report from the Utilities Menu of the User Interface. (Refer to that section in the ªUtilities menuº chapter of the Xerox MRP Family System Administration Guide.)

·Using the Function Selection via Line (FSL) command T4Ð Printout Settings (in non-IPDS only)

·Pressing the test button on the interface card (refer to Figure 1-2).

Refer to the ªT2ÐOnline Hex Dumpº and ªT4ÐPrintout Settingsº sections in the ªFunction Selection via Line (FSL) commandsº chapter for information on how to use these FSL function commands.

For a description of the procedures for printing the coax Interface Configuration Report from the control panel through the Utilities menu, refer to ª Interface Configuration Reportº

XEROX MRP FAMILY COAX COMMAND REFERENCE

1-7

Page 28 Page 30
Image 29
Page 28 Page 30
Contents Xerox Page Canada Installation cautionSafety Europe 50 Hz, 220 240 V equipment Laser safetyAvoid Direct Exposure to Beam 50hz. Configuration 60hz. Configuration Do not do this Operational safetyDo this Configuration of ELCI/RCD Window Reset button Safety featureApprovals and certification 60 Hz, 115International configuration of ELCI/RCD Window Reset button Page Table of contents Function Selection via Line FSL commands Xiii Xiv Font support and selection Error handlingConfiguration and sysgen samples Appendices Configuration and Resource Utility MVSIndex GlossaryGLOSSARY±1 INDEX±1Page Text conventions About this manualConventions GSM Procedure conventionsEnter print BoldKeyboard key Procedure conventionsÐpersonal computer PCWindow messages Page Emulated printers Overview and printer setupPrinter Model Type Speed Xerox printerCPI LPI Character setsMRP Family user interface interaction with coax interface Features and compatibilitiesPrinter setup Print Language Setup HP LaserJet Emulation Mode For A4 paper use Sets the default paper size Configuring the Coax interface cardSets the default print language ST1Size Checking the interface configurationPrint language Printer address and emulationSample of a Coax Interface Configuration Report Command Numbers and names FSL cross reference for the coax configurationMRP Family delete current job capability DSC control codes Data stream commandsCommand summary and comparison Carriage Return CR DSC command descriptionsEnd of Message EM Form Feed FFReserved codes Null NULSCS data stream structure Command summarySCS command comparison Supported SCS commandsSCS coax Command descriptionsBack Space BS Bell BEL Enable Print ENPHorizontal Tab HT Graphic Escape GEInhibit Print INP RememberLine Feed LF Interchange Record Separator IRS2BD2nn48xxxxxxsddoddxxxxxxxx Presentation Media PPMExtended highlighting definitions Set Attribute SAColor definitions Character Set definitions2BC803grop Set Graphic Error Action Sgea2BC1nnhhlmrmht...tn Set Horizontal Format SHFOne-byte number that specifies the column Set Line Density SLD Set Print Density SPD 2BC2nnvvvtmbmvt1...tn Set Vertical Format SVFOne-byte number that specifies the first print Vertical Channel Select VCS Transparent TRNVertical Tab VT Page Storing and reading settings Setting levelsFunction Selection via Line FSL Actions at power upFSL escape character Using FSL escape characterTypes of FSL escape character PermanentRemoving FSL escape character Format of FSL escape sequencesFSL commands General syntax of an FSL commandFSL types FSLSet IBM Buffer Size FSL Common command features HEX ESCÐSingle Paired Hex TransparentESC-ESCÐMultiple Paired Hex Transparent T1ÐOffline Hex Dump Pcia Dump T4ÐPrintout SettingsT2ÐOnline Hex Dump T3ÐOnline Ascii Hex DumpX0ÐSet Printer in Hold Mode T6ÐCancel Online Ascii Hex DumpT5ÐPrintout Character Set WÐPrint Bar CodeX3ÐRestore Factory Default Settings X2ÐRestore Settings from Permanent StorageX4ÐRestore Settings from Permanent Storage Y1ÐSet IBM Buffer SizeLPI Y2ÐSet Default LPI@Y2, n@ Y4ÐSet Default Line Spacing single/double Y3ÐSet Default CPI@Y3, n@ @Y4,n@@Y5,n@ Y5ÐSet Default Maximum Page Length MPLY7ÐSet Case mono, dual Y6ÐSet Default Maximum Print Position MPP@Y6, n@ @Y7, n@@Y8, n@ Y8ÐSet LU1 Language@Y9, n@ Y9ÐSet Default Print Quality@Y10, n1, n2@ Y10ÐSet Page Format@Y11, n1, n2@ Y11ÐSet Default Paper PathUtility PCL parameter to 4220/MRP Y11, n1 Esc&I#H 4230/MRPFunction Selection VIA Line FSL Commands PCL Y12ÐSet Default Paper Size@Y12, n1 ,n2@ PCL5 Y13ÐSet Wrap/Cut Option at Physical Paper Size@Y13, n1 , n2@ Y19ÐSet Simplex / Duplex Y14ÐEnable Graphic Option@Y14, n@ @Y19, n@@Y19, 1@ Y25ÐFF Before Local Copy@Y10,1@ @Y25, n@@Y26, n@ Y26ÐFF After Local CopyExample @Y25, 1@ sets Form Feed Before Local Copy Example @Y26, 1@ sets Form Feed After Local Copy @Y27, n@ Y27ÐNon-SCS Print ImageCarriage Return CR is received at MPP+1 Y28ÐNon-SCS, CR at MPP +@Y28, n@ Received at MPP+1 Y29ÐNon-SCS, NL at MPP +@Y29, n@ On the next form Y30ÐNon-SCS, Valid FF Followed by Data@Y30, n@ Next form Y31ÐNon-SCS, Valid FF at End of Print Buffer@Y31, n@ @Y32, n@ Y32ÐNon-SCS, FF Valid@Y33, n@ Y33ÐNon-SCS, Automatic Function at End of JobY36ÐSuppress IBM Control Code Y34ÐLast LF on Page Sent as FF@@Y34, n@ @Y36, n@@Y37, n@ Valid SCS codes Code Command name Ebcdic HexY37ÐIBM Printer Emulation Select Y44ÐSuppress CR and SP to Same Position Y38ÐIBM Communication Feature Query, EAB@Y38, n@ @Y44, n@@Y46, n1 , n2 , n3@ Y46ÐSet IRQ Timer@Y47, n @@!ascii ascii@ Y47ÐESC-Mode Selection@Y49, n1 `password@ Y49ÐRestrict Access of Temporary and Permanent SettingsY48ÐSet Permanent Escape Example 1 @Y249, FOREST@ @Y253, 1@Y50ÐFF After Time Elapse Y51ÐUser Strings at Power Up@Y50, n@ Print bufferY58ÐUser-defined String After Local Copy Y57ÐUser-defined String Before Local CopyDef. no Y59ÐBar Code Definition@Y59, Def. no., Bar code type, Height ,Expansion@ UPC and EAN Bar code types second digit explainedExample @Y59, 1, 29, 9, 2@ @W1, LaserJet@ Y60ÐFont Link for GFIDs@Y60, n1, n2@ CPIGfid Gfid = Pitch equivalencePitch PSMPitch choices Original pitch Selected pitch Y61ÐSetup for User-defined Strings@Y61, n, string@ String@Y62, n, string@ Y62ÐSetup for IBM-defined StringsExample 2 @Y61, 5, 1B*c300A*c30B1B*c0P@ Attributes # String Choice for PCL StringCPI 140 Draft 141 18 Near Letter Quality 142 Correspondence HMI LAC 10 CPILAC 15 CPI Y73ÐSelect Translate Table Y72ÐReset Translate TableY71ÐCreate Translate Table Y75ÐOverwrite Translate Table Y74ÐDefine Symbol Set String@Y74,string no.,HEXdata@ @Y75, n1, n2, data n1,n2, data@@Y76,table number@ Y76ÐCreate APL Translate TableOverwrite methods available Y78ÐSelect APL Translate Table Y77ÐReset APL Translate Table@Y77,table number@ @Y78,table number@@Y80, n1, n2, data n1, n2, data@ Y80ÐOverwrite APL Translate TableY88ÐDefine Page Offset Y89ÐEnable Page Offset@Y88 n1, n2 ,n3@ @Y89, n1 ,n2@@Y90, n1, n2@ Y90ÐDefine User Escape String@Y91, n1, n2, n3, n4, n5 ,n6@ Y91ÐGFID/Font Select SetupExample @Y90, 1A, `ABCD 8F, `@Y8, 4@ @ exchanges future IBM Gfid Gfid PitchTypographic Y94ÐTypeface Strings Y92ÐPoint Size StringsY93ÐAttribute Strings @Y96, GFID@ Y98ÐEnable Automatic Page Orientation APO SupportY96ÐGFID Select @Y100, n1 , n2@ Y100ÐPrinter Share String and TimerTimeout Y249ÐEnter Engineering Mode Y119ÐEnable/disable automatic paper size configurationY120ÐSetting Printout at Power Up Placing commands in the data stream Y253ÐAllow passwordsLayout functions ZÐSend User-defined StringsOrientation algorithm COR END YESEND YES LPL TBM Logical Page SizeLBM LPWFunction Selection VIA Line FSL Commands Page Included fonts Supported fontsFONT000A 3816 emulation fonts and their corresponding GFIDs Font namePrint density to Gfid mapping Global Font Identifiers GFIDsGfid to PCL font mapping Character per inch CPI Gfid interval and related pitchPrint Density Font selection via FSL in coax Font selection using printer resident PCL fontsXXX Selecting COR fontsXxxyy Typo Character setsCOR font mapping Characters per inch CPI Selection Page Error code descriptions Error type IBM error typesFSL error messages Recoverable printer errorsRecoverable errors Recoverable errors Code Error type Code descriptionNonrecoverable hardware errors Code Error Code Description Nonrecoverable hardware errorsRecoverable errors Code Error Code Description Page Host Coax printers line configurationsConfiguration and Sysgen Samples Sysgen samples Sample IO Gen for the 3174/3274Ðnon-SNA controller Sample NCP GenÐGroup, Line, PU, and LU definitionsÐ3274-61C Sample NCP GenÐGroup, Line, PU, and LU definitionsÐ3276-C JES/328X print facility parametersModetab Modeent LOGMODE=S3270 Page Installing your Configuration and Resource Utility Configuration and Resource Utility MVSCart Xxxxxxxx JOB UuuuConfiguration and Resource Utility MVS UNIT= CART,LABEL=2,SL,,,EXPDT=98000 LOADINST,CLASS=A,MSGCLASS=XDD DSN=XMRP.V1R2M1.CFGDLIB Copy INDD= CART,OUTDD=TARGETDISP=,CATLG,DELETE,UNIT=3380 DD DSN=XMRP.V1R2M1.LINKLIBDCB=RECFM=U,BLKSIZE=6144 DD DISP=SHR,DSN=XMRP.V1R2M1.LOADManaging fonts 3816 emulation fonts Font name Loading fontsManaging forms Accessing the Font List screenLoading Xerox forms Accessing the Form List screenManaging lists of resources Downloading Ascii files Accessing the List Manager screenLoading lists of resources VPS 6.2 transparency Configuration Description ListAccessing the Configuration Description List screen Configuration and Resource Utility MVS 00005A PDS Member not Found Creating a configuration fileCreating the User-created FSL Modifying and loading a configuration fileModifying a configuration file Deleting or copying a configuration file Configuration in the VM environmentLoading a configuration file Please Enter Printer DestinationSelecting functions Configuration and Resource Utility componentsFunction keys Keys Name Description BackwardAccessing the MVS Ispf Primary Option Menu == TSO Exec XMRP.V1R2M1.CLISTXRSCMNU Invoking the Configuration and Resource UtilityTSO Exec `XMRPV1R2M1CLISTCRTCFGD Create Configuration DescriptionYES NONE,YES,NO FF After Time Elapse TSO Exec `XMRPV1R2M1CLISTCHGCFGDmember name Change Configuration DescriptionSaving a Create Configuration Description Refer to -2 for a description of the function keys Saving a Change Configuration Description Clist code listingsHandling error messages Listing configuration descriptionsLoading configuration descriptions Creating configuration descriptionsChanging configuration descriptions XMRPV1R2M1CLISTLDXRXFNT Proc 2 Fntname Dest CommandAlloc DAXMRPV1R2M1FNTLIB&FNTNAME Ffont Reuse CALLXMRPV1R2M1LOADLDXRXFNTPage Font and code set tables Table A-1.PCL Translate Codepage 500 to Roman Table A-2.PCL Translate Codepage 500 to PC Table A-3.PCL Translate Codepage 500 to Ecma Font and Code SET Tables Table A-5.PCL Translate Codepage 500 to Ascii Bit Equivalent to PCL translate table Table A-7.PCL Translate Codepage 500 to OCR B Table A-8.PCL Translate Codepage 500 to PC-850 RSP NSP Table A-10. Code Table A-11.Code Page 274ÐBelgian Table A-12.Code Page 275ÐBrazilian Table A-13.Code Page 276ÐFrench Canadian Table A-14.Code Page 277ÐDanish/Norwegian RSPTable A-15.Code Page 278ÐFinnish/Swedish Table A-16.Code Page 280ÐItalian Table A-17.Code Page 281ÐJapanese Latin characters Table A-18.Code Page 282ÐPortuguese Table A-19.Code Page 284ÐSpanish/Spanish speaking Table A-20.Code Page 285ÐU.K. English Table A-21.Code Page 297ÐFrench Table A-22.Code Page 500ÐMultinational Table A-23.APL character assignment in EBCDIC-SNA mode Table A-24.DSC code page EBCDIC-DSC modes NULTable A-25.DSC APL character assignment Table A-26.APL character assignment EBCDIC-DSC Font and Code SET Tables DSC option defaults 4214 4028 Default 4215/MRP coax DSC option defaultsSetting Default settings 3262 3268 3287 3812/16 4245 6262 4220/4219 DSC optionTable C-1.DSC Commands Name Code Command summaryTable C-2.SCS commands Name Code MPP Commands Description of feature DefaultMPL EAB Description of feature Command DefaultXx = Description of feature Command Default Pcia Communications buffer`0FFF` `1FFF`Address Function Description Printer Output AreaPrinter output area Output area Control unit output area Control Unit Output AreaSCS Coax Communications Buffer Abort OrdersSystem Status Available SSA Print order processingDSC print order processing Table D-5.Extended field attribute EFA Bit Value Description Field Attribute FA character definitions BitTable D-6.Character attribute CA IBM Typeface Symbol Set PointTable E-1.PCL fonts and equivalent IBM GFIDs Font name EAN/UPC Equivalent IBM GFIDs Font name Dutch 601 Bold 1405 FSL Y14 FSL Y37 FSL Y38 Table F-1.Recommended settings IBM printersMRP Family Font Formats Sending data to multiple ports Printing a separator page between jobsHelpful Hints Page Query replies Query Replies 0BÐ0E CPI C6 MPPDC MPP Lcid = APL 0AÐ0B Byte Value Hex Description0CÐ0D 0EÐ0F0BÐ0C Table G-6.Highlight reply Byte Value Hex DescriptionTable G-10.Data streams reply Table G-8.Save restore Reply Byte Value Hex DescriptionTable G-9.Data chaining reply Byte Value Hex Description 0C FF 0DÐ0E1AÐ1B 1CÐ1DXerox MRP Family publications Related publicationsInternational Publication Number LanguageTCP/IP Other publications IBM publicationsRank Xerox documentaion Numbers Publication Language Rank Xerox documentation numbersTRNCLASS=A,C,35 VPS remote configurationOverview of VPS FCB Support = no Group Definitions Grpname = Usmg 42XX/MRP transparencySepinfo = USEREX01 JES Sysout Selection Criteria SYSUT1 DD DSN = JK12345.FSLFILE.Y37,DISP = SHR PCL forms overview· FORMFIXC.EXE · FORMFIXC.SYS · READMECX.DOC Using FormFixC to create macrosInstalling FormFixC Macro ID Implementing FormFixCSending a PCL macro to the printer Transferring a macro to the IBM hostSYSUT1 DD DSN = JK12345.PCLFILE.INVOICE,DISP = SHR \COPY /B INVOICE.PCL LPT1Line Overlay commandMerging variable data with a single form macro Line Line N Call commandSYSUT1 DD DSN = JK12345.EBCDIC.VARDATA2,DISP = SHR Merging variable data with different forms macros Switching form orientation Space LimitationsPage Glossary BSC Cuoa CORDSC DOSEAB EbcdicEFA HP PCL GSMIRQ IpdsLPL LU1GLOSSARY-8 Xerox MRP Family Coax Command Reference OS/VS2 OEMPA1 PA2RAM PDLPOA SCS ROMSNA SSAThroughput TroubleshootingTypeface Utility PagesNumerals IndexIndex Xerox MRP Family Coax Command Reference INDEX-3 INDEX-4 Xerox MRP Family Coax Command Reference GDDM, 1-2, GLOSSARY-5 FSL, GLOSSARY-5IRQ, 3-38, GLOSSARY-6 MSA + ML-1, D-9, GLOSSARY-8 GLOSSARY-8GLOSSARY-7 LPL, 3-68, GLOSSARY-7PCL 5, 1-1, 1-3, GLOSSARY-9 font, E-1 to E4t Xerox MRP Family Coax Command Reference INDEX-9 INDEX-10 Xerox MRP Family Coax Command Reference Valid INDEX-12 Xerox MRP Family Coax Command Reference Alternate Media Order Card T T E D Business Reply Mail
Related manuals
Manual 90 pages 37.42 Kb Manual 56 pages 52.48 Kb Manual 54 pages 46.38 Kb

4220/MRP, 4219/MRP, 4215/MRP, 4230/MRP specifications

The Xerox 4219/MRP, 4220/MRP, 4215/MRP, and 4230/MRP are multifunction printers designed for businesses that require efficient printing, copying, and scanning solutions. These models exemplify Xerox's commitment to quality, reliability, and user-friendly features, making them ideal for both small and medium-sized enterprises.

One of the main features of these models is their versatility. They handle a wide range of paper formats, from letter-sized documents to larger legal-sized prints, and support various media types, including glossy and plain paper. This flexibility allows businesses to produce everything from basic documents to vibrant marketing materials without the need for multiple devices.

The Xerox 4219/MRP is noted for its compact design, making it suitable for office environments with limited space. It offers a robust printing speed of up to 19 pages per minute, ensuring fast document output. It incorporates advanced digital technology, ensuring that each print is sharp and clear, providing excellent image quality for both text and graphics.

In contrast, the Xerox 4220/MRP features enhanced printing speed, reaching up to 20 pages per minute. This model is ideal for teams that require higher volumes of prints on a daily basis. Both the 4219 and 4220 models come equipped with intuitive touch-screen controls, simplifying user interactions and minimizing training time.

The Xerox 4215/MRP stands out with its affordability and energy efficiency. This model is designed for budget-conscious businesses without compromising performance. It features automatic duplex printing, which reduces paper usage and cuts down operational costs. Its compact build and easy installation process make it a practical choice for any workspace.

The Xerox 4230/MRP, on the other hand, is designed for higher productivity needs, boasting a printing speed of up to 30 pages per minute. It incorporates advanced connectivity options, including wireless printing capabilities, mobile printing support, and integration with cloud services. This feature enables employees to print from various devices seamlessly, enhancing workflow efficiency.

All four models utilize Xerox’s proprietary imaging technology, ensuring exceptional image quality and consistent performance over time. They also come equipped with security features to protect sensitive information, such as password-protected printing and user authentication protocols.

In summary, the Xerox 4219/MRP, 4220/MRP, 4215/MRP, and 4230/MRP offer a range of features suitable for different business needs, from high-volume printing to cost-effective solutions. Their advanced technologies, user-friendly interfaces, and robust performance make them reliable choices for any modern office.
Top Page Image Contents