Xerox 4219/MRP, 4230/MRP manual Y31ÐNon-SCS, Valid FF at End of Print Buffer, @Y31, n@, Next form

FUNCTION SELECTION VIA LINE (FSL) COMMANDS

Y31ÐNon-SCS, Valid FF at End of Print Buffer

@Y31, n@

Implements an IBM RPQ and takes effect as soon as the command is received. This function determines the print line position when a Form Feed command is the last command in the print buffer, or is immediately followed by an end of message code.

n	Values for n are:
	0*	Next character position is the 1st Print
		Position (PP) on the 2nd line on the next
		form, when a valid FF positioned at the
		end of the IBM print buffer, is received.
	1*	Next character position is the 1st Print
		Position on the next form, when a valid
		FF, which is not positioned at the end of
		the IBM print buffer, is received.

The default is product dependent. PCL platform has a default of

1.If n = 0, (default) is selected, it automatically adds a new line to a Form Feed command at the end of the print data. The printer is set to print at position 1 of the second line of the next page. If n = 1 is selected, it executes only a Form Feed command. The printer is set to print at position 1 of the first print line of the next form. This option is ignored if Automatic Form Feed at End of Buffer (Y33) is ENABLED or Form Feed After Local Copy (Y26) is ENABLED.

This option corresponds with the IBM 3268 RPQ SC9504 and the

IBM 3287 RPQ SC3749.

Example	@Y31, 1@ sets the printer to advance to 1st PP and 1st line on
	the next form.

Print position 1 2 3

Same print line

Next print line

Next print line

MPP+1

oForm feed code here

Present form

Last print line

ON

OFF

Page boundary

Next form

3-32 XEROX MRP FAMILY COAX COMMAND REFERENCE