Xerox C424 manual User Safety, Electrical Safety

Page 1

WorkCentre® C2424 Copier-Printer

User Safety

Your system and the recommended supplies have been designed and tested to meet strict safety requirements. Attention to the following information will ensure the continued safe operation of your system.

Electrical Safety

Use the power cord supplied with your system.

Plug the power cord directly into a properly grounded electrical outlet. If you do not know if an outlet is grounded, ask an electrician to check the outlet.

Do not use a ground adapter plug to connect the system to an electrical outlet that does not have a ground connection terminal.

Do not use an extension cord or power strip.

Warning

Avoid the potential of electrical shock by ensuring that the system is properly grounded. Electrical products may be hazardous if misused.

Do not place the system in an area where people might step on the power cord.

Do not place objects on the power cord.

Do not block the ventilation openings. These openings are provided to prevent overheating of the system.

Do not drop paper clips or staples into the system.

Warning

Do not push objects into slots or openings on the system. Making contact with a voltage point or shorting out a part could result in fire or electrical shock.

If you notice noises or odors that are not associated with your normal system operation:

1.Turn off the system immediately

2.Disconnect the power cord from the electrical outlet

3.Call an authorized service representative to correct the problem.

Copyright © 2005 Xerox Corporation. All Rights Reserved.

A-1

Image 1
Contents Electrical Safety User SafetyOperational Safety Maintenance SafetySystem Location Moving the System 42 kg 93 lbs Symbols Marked on the System