Moving the System

Caution

Parts of the system are hot. To avoid personal injury or damage to the system, allow the ink to solidify. Run the shut-down procedure to cool the system quickly. Wait at least 30 minutes for the system to cool completely before moving or packing it.

■Always allow the system to cool before it is moved to avoid ink spills which can damage the system.

■Use the shut-down procedure at the control panel (Shut Down for Moving System) for best results.

■Never move the system if you receive a Power Down Error-Head not Parked message at the system’s control panel. This message means the system is not ready to be moved. If the printhead is not locked, the system can be damaged during shipment.

■Always turn off the system using the power switch, located under the interface cover on the right side of the system, and unplug all cables and cords. Do not turn off the system by pulling the power cord or using a power-strip with an on/off switch.

■Always secure the scanhead shipping restraint on the left side of the scanner to lock the scanhead before removing the scanner portion of the system. Shipping the scanner with the scanhead unlocked can damage the scanner.

2424-107

■

Always remove the document feeder before shipping the system. Always remove the scanner before shipping the system.

WorkCentre® C2424 Copier-Printer

A-4