The power cord is attached to the system as a
Warning
Do not remove the covers or guards that are fastened with screws unless you are installing optional equipment and are specifically instructed to do so. Power should be OFF when performing these installations. Disconnect the power cord when removing covers and guards for installing optional equipment. Except for
The following are hazards to your safety:
■The power cord is damaged or frayed.
■Liquid is spilled into the system.
■The system is exposed to water.
If any of these conditions occur:
1.Turn off the system immediately.
2.Disconnect the power cord from the electrical outlet.
3.Call an authorized service representative.
Maintenance Safety
■Do not attempt any maintenance procedure that is not specifically described in the documentation supplied with your system.
■Do not use aerosol cleaners. The use of supplies that are not approved may cause poor performance and could create a hazardous condition.
■Do not burn any consumables or routine maintenance items. For information on Xerox supplies recycling programs, go to www.xerox.com/gwa.
Operational Safety
Your system and supplies were designed and tested to meet strict safety requirements. These include safety agency examination, approval, and compliance with established environmental standards.
Your attention to the following safety guidelines helps to ensure the continued, safe operation of your system.
System Supplies
■Use the supplies specifically designed for your system. The use of unsuitable materials may cause poor performance and a possible safety hazard.
WorkCentre® C2424