Xerox Nuvera™ 100/120 Digital Copier/Printer Customer Expectations Document
All yield estimates are based on the indicated 6% area coverage at standardized conditions using 8 ½” x 11”
/A4 Xerox 20 lb. (75 gsm) stock. Please note that actual yields vary greatly depending on area coverage, paper stock, and image quality control settings. The current estimates are shown below.
Consumables
Supply | Yield Estimates |
Toner | 110,000 prints/ 10 lb. drum @ 6% AC |
100 Sheet Staple | Comes installed in machine. Filled with 1 - |
Cartridge | 5,000 staple refill, this cartridge typically |
| lasts the life of machine. |
100 Sheet Staple Refills | 5,000 staples per refill, 3 refills per carton |
50 Sheet Staple | Required for initial |
Cartridge | order. Filled with 1 - 5,000 staple refill, this |
| cartridge typically lasts the life of machine. |
50 Sheet Staple Refills | 5,000 staples per refill, 3 refills per carton. |
Staples Refills for MFF | 2,000 staples per box; 16,000 per carton |
Booklet Maker | (8 Boxes per carton) |
(1 for rear and 1 for |
|
front stapler required) |
|
|
|
Customer Replaceable Units
CRU | Yield Estimates |
Toner Waste Bottle | 750,000 prints |
Waste Developer Bottle | 350,000 prints |
Disposal Process
All Toner Waste Bottles include a prepaid return shipping label, plastic bag, and tie in the box. This is the preferred method of disposal.
Empty dry ink containers and waste containers are safe and approved for local recycling with common commercially used plastics.
More information can be found at www.Xerox.com, under Online Supplies Ordering; Cartridge Recycling Program.
System Performance Impacts
The printer should not cycle down as long as it receives a page to print within five seconds of completing the previous page. Depending on job characteristics, the following may or may not impact system performance.
Item
Xerox Nuvera™ 100/120 Digital
Copier/Printer
Comment
Print Quality Adjustments
Brief pauses for registration or xerographic process adjustments to maintain high image quality
- 10 -