Outline of the Manual, Main body & Accessory

Appendix: <Service Mode> <Error Codes>

INTRODUCTION

2 Outline of the Manual

This Service Manual contains basic facts and figures needed to service the machine, Paper Deck-J1/K1, Buffer Pass Unit-B1, conducted to ensure a high level of performance and ex- pected functions.

The following accessories come with separate service manuals or service informations; refer to them for details:

1.RDF-E3

2.Stapler Sorter-F2

3.Film Projector-E1

4.Editor-F1

5.ED Board-C1

6.Interface Board-E1

7.Preview Monitor Board

*Refer to CLC1000 series service manual.

This Service Manual is organized as follows;

<Main body & Accessory>

Chapter 1	General Description:	Features, specifications, how to operate
Chapter 2	New Functions:	Principle operations of each unit;
		timing of operations; how to disassemble and assemble
		(special information from CLC1000 series only)
		If necessary, refer CLC1000 series service manual.
Chapter 3	Installation:	Requirements on the site of installation, installation pro-
		cedure
Chapter 4	Maintenance And Inspection:Periodically replaced parts table, consumables and
		durables table, scheduled servicing chart, scheduled ser-
		vicing table
Chapter 5	Troubleshooting:	Basic procedure for image adjustment, standards/adjust-
		ments, troubleshooting image faults, troubleshooting mal-
		functions
		General timing chart, general circuit diagrams

CANON CLC5000 REV.0 JAN. 2001