Attaching to the Mast mast not included

DNote

You may wait to unfold the elements until you get the antenna up on the roof or in your attic.

BWarning

Do not pull the elements near their outer ends or you could damage them.

3.7 Attaching to the Mast (mast not included)

We recommend you get the help of another person before you put up the mast or attach your antenna to it. How you set up your mast depends on your specific installation.

Refer to the separate Consumer Product Safety Commission Information for recommended methods.

1Slide the antenna’s mast clamp assemblies over the end of the mast, with the main boom plastic brackets on top, and the support boom under it.

2Tighten the mast clamp assemblies' lock nuts to hold the antenna in place. Do not overtighten the lock nuts.

BWarning

The crossover wires must not touch the antenna boom, the mast, or each other.

If necessary, carefully bend the crossover wires to provide at least 1/2 inch of clearance. 7

Mast Clamp

Support Bracket

Crossover Wires

Support Boom

Main Boom

Mast

3Set up the mast, then rotate it so the antenna’s shortest elements point toward the stations you want to receive.Then secure the mast into position.

Toward TV Station

DNote

You can also put the antenna in an attic space. You can mount it from a rafter or place

the antenna on the attic floor. However, we recommend you use mounting hardware for a secure attic installation.

3.8Routing the Cable toYour TV/FM Receiver

1Use plastic tape to secure the coaxial cable to the mast at about 3-foot intervals.

2Use coaxial nail clips every few feet to secure the cable between the mast and where the cable enters the house.

3Use a 75 ohm grounding block at the point where the cable enters the house. Read the separate Consumer Product Safety Commission Information for

grounding instructions.

4Make a drip loop with the cable before it enters the house to avoid water following along the cable.

5Use a wall-through tube to neatly route the coaxial cable through the walls.

6Use only the length of cable that your installation requires. Do not coil extra cable behind the receiver. Cut it to the

correct length.

ENGLISH

SDV4401/27 specifications

The Philips SDV4401/27 is a high-performance indoor antenna designed to optimize the reception of digital television signals. Tailored for urban environments with proximity to broadcast towers, this antenna stands out due to its sleek design and advanced technological features that ensure reliable performance.

One of the primary features of the SDV4401/27 is its multi-directional reception capability. This allows the antenna to capture signals from multiple transmitter locations without the need for constant repositioning. The built-in amplifier enhances the signal strength, ensuring that users receive clear, interruption-free digital broadcasts. With the ability to pick up both UHF and VHF signals, the antenna supports a wide range of channels, accommodating various viewing preferences.

The SDV4401/27 incorporates SmartPass technology, which intelligently adjusts the amplification level according to the distance from the broadcast tower and the surrounding environment. This innovative feature optimizes the reception quality while minimizing interference from background noise, which can be particularly beneficial in metropolitan areas where signal disruption is common.

Installation of the Philips SDV4401/27 is straightforward, thanks to its user-friendly design. The antenna is lightweight and compact, making it easy to place on a shelf or mount on a wall. The included adhesive mounting strips provide flexibility in positioning, allowing users to experiment with the location to achieve the best reception without damage to surfaces.

Another notable characteristic of this antenna is its stylish and modern aesthetic. It fits seamlessly into various home decors, adding an elegant touch to any setup. Its compact size makes it an ideal option for apartment dwellers or anyone dealing with limited space.

Additionally, the antenna's durable construction ensures longevity, enabling it to withstand the typical wear and tear associated with indoor use. Philips stands by its product quality, providing peace of mind through reliable performance.

In summary, the Philips SDV4401/27 indoor antenna is a versatile and efficient solution for digital TV reception. With its multi-directional capabilities, SmartPass technology, and user-friendly installation, it offers a compelling choice for anyone looking to enhance their television viewing experience. Whether for sports, movies, or news, this antenna is designed to deliver crisp, clear channels consistently.