CAUTION
•Do not touch the ink port (B).
•Do not shake or drop the ink tank as the ink may leak and stain your clothes or hands.
•Do not attempt to reattach the protective cap once you remove it.
•Do not place the ink port in contact with any other surface.
(B)
7 Insert the ink tank into the empty slot on the print head.
8If you need to replace another ink tank, repeat steps 5 to 7.
9Close the Inner Cover.
CAUTION
• Press the center of the Inner Cover until the cover locks into place.
10 Return the Scan Unit to its original position.
11 If you replaced the black ink tank, press [W]. If you did not, press [X]. 12 If you replaced the color ink tank, press [W]. If you did not, press [X].
XCleaning The Print Head
If the printed nozzle check pattern is broken, missing, or a specific color is not printed, clean the print head.
1Press [Menu] repeatedly until <USER DATA> appears.
2Use [W] or [X] to select <MAINTENANCE>, and then press [OK].
3Use [W] or [X] to select <CLEANING> or <HEAD REFRESHIN> as necessary.
Performs normal print head cleaning. | |
Performs deep print head cleaning. |
4Press [OK].
Chapter 6 | Maintenance | 25 |