Canon MP499 manual Preparing to Connect My Multifunction To My Network

Page 4

Preparing to Connect My Multifunction To My Network

	<< Previous			Next >>

An "Ad-hoc connection," which establishes a direct connection to the computer over a wireless connection without using an access point, is not supported.

Notes on Network Connection

The configuration, router functions, setup procedures and security settings of the network device vary depending on your system environment. For details, refer to your device's instruction manual or contact its manufacturer.

The machine cannot be used over a wireless and wired connection at the same time.

4

Image 4

Contents Next Network Requirements Preparing to Connect My Multifunction To My Network Preparing to Connect My Multifunction To My Network Installing the Drivers & Software Step One Step TwoClick Easy Install. Click Install Step Three Step FourStep Six Step FiveSelect Use the printer on network, then click Next Step Seven Step Eight Step Nine Step Ten 10-A Click ConnectIf the Confirm Connection Access Point screen appears Step Ten 10-BStep Eleven Step Twelve Registering the Printer & Scanner Mac OS X v .5.x / 10.6.x Go to -A Mac OS X v .4.11 Go to -B Select Canon MP499 series canonijnetwork and click Add Step Two Step Three Register ScannerSelect Canon MXxxx series on the Scan-from-PC Settings Step Four Step FiveStep Six Step Seven Click Next on the Print Head Alignment RecommendedStep Eight Previous