Installing the Drivers & Software
| << Previous |
| Next >> | |
|
|
|
|
|
Step Ten 10-A
If the Detected Access Points List screen appears: If the screen below does not appear, perform
1.Select the target access point name/network name (SSID).
2.Enter the network key.
Enter upper and lower case letters of the alphabet correctly. Letters are case sensitive.
To use WEP key number 2, 3 or 4, click WEP Key Number, then specify the WEP key number.
3. Click Connect
Go to Step Eleven.
Note:
If the target access point is not displayed on the Detected Access Points List or Access Points screen, refer to the printed manual: Network Setup Troubleshooting.
For details on how to check the access point name/network name (SSID) and network key, refer to the manual supplied with your access point or contact its manufacturer.
11