Belkin F5D7011 manual WPA-PSK no server

Page 24

Using the Belkin Wireless LAN Utility

WPA-PSK (no server)

Choose this setting if your network does not use a radius server. WPA-PSK (no server) is typically used in home and small office networking.

1.From the Security Mode drop-down menu, select “WPA-PSK (no server)”.

2.Enter your network key. This can be from 8 to 63 characters and can be letters, numbers, or symbols. This same key must be used on all of the clients (network cards) that you want to include in your wireless network.

3.Click “Apply Changes” to finish. You must now set all clients (network cards) to match these settings.

22

Image 24

Contents High-Speed Mode Wireless G Notebook Network Card Table of Contents Advantages of a wireless network IntroductionPlacement of your Wireless Router or Access Point IntroductionCordless Phone Placement Choose the quietest channel for your wireless networkAvoid Obstacles and Interference Secure connections, VPNs, and AOL Product Features OverviewProduct Specifications OverviewApplications and Advantages Package Contents System RequirementsInstalling and Setting up the Card Install the SoftwarePlug the Card in an Available CardBus Slot of your Laptop Installing and Setting up the Card Let Windows Finish the InstallationInstallation is now complete Using the Belkin Wireless LAN Utility How to Access the Belkin Wireless LAN UtilitySetting Wireless Network Preferences Click on the Wireless Networks tabEnable Radio Available NetworksUsing the Belkin Wireless LAN Utility Add, RemoveSystem Tray Icon PropertiesAny Available Network access point preferred Access Point Infrastructure Networks OnlyComputer-to-Computer Ad-Hoc Networks Only Securing your Wi-FiNetwork WEP Wired Equivalent PrivacyEncryption Methods Bit WEPBit Encryption Encryption KeysC3 03 0F AF 0F 4B B2 C3 D4 4B C3 D4 E7 = 128-bit key WPA Wi-Fi Protected Access Changing the Wireless Security Settings Network key= Wrong PasswordWEP Setup Bit WEP EncryptionC3 03 0F AF 0F 4B B2 C3 D4 4B C3 D4 E7 = 128-bit WEP key WPA-PSK no server WPA with server Settings Using the Belkin Wireless LAN Utility Using the Belkin Wireless LAN Utility Using the Belkin Wireless LAN Utility Using the Belkin Wireless LAN Utility Monitoring the Status of your Network Connection Signal Client IP AddressNetwork Connection Type Radio StateMonitoring Data Transfer Click on the Statistics tabFinding Available Networks in your Area Performing Diagnostic Tests on your Connection Click on the Diagnostics tabControl Registers Sprom Format VersionInterrupt Test Loopback TestLED Test Troubleshooting Can’t connect to the Internet wirelesslyName of your wireless network appears in Available Networks Troubleshooting Installation CD-ROM does not start Setup UtilityPower LED does not come on Card is not working Link LED is solid but cannot connect to the Internet Signal strength is poor Data transfer is sometimes slowTroubleshooting Troubleshooting Wireless Comparison What’s the difference between 802.11b, 802.11g and 802.11a?Technical Support Europe 00 800 223 55 Australia 1800 666Information Information Section Belkin Tech Support Belkin Corporation Belkin Components B.V