Belkin F5D7011 manual WPA with server Settings

Page 25

Using the Belkin Wireless LAN Utility

WPA (with server) Settings

Choose this setting if your network uses a radius server to distribute keys to the clients (network cards). WPA (with server) is typically used in business networks.

1.From the Security Mode drop-down menu, select “WPA (with Radius Server)”.

2.Enter the IP address of the radius server into the “Radius Server” fields.

3.Enter the radius key into the “Radius Key” field.

4.Enter the key interval. The key interval is how often the keys are distributed (in packets).

1

2

3

4

5

6

7

8

9

10

section

5.Click “Apply Changes” to finish. You must now set all clients (network cards) to match these settings.

IMPORTANT: You must now set all wireless network cards/ adapters to match these settings.

23

Image 25
Contents High-Speed Mode Wireless G Notebook Network Card Table of Contents Introduction Advantages of a wireless networkIntroduction Placement of your Wireless Router or Access PointChoose the quietest channel for your wireless network Cordless Phone PlacementAvoid Obstacles and Interference Secure connections, VPNs, and AOL Overview Product FeaturesOverview Product SpecificationsApplications and Advantages System Requirements Package ContentsInstall the Software Installing and Setting up the CardPlug the Card in an Available CardBus Slot of your Laptop Let Windows Finish the Installation Installing and Setting up the CardInstallation is now complete How to Access the Belkin Wireless LAN Utility Using the Belkin Wireless LAN UtilityClick on the Wireless Networks tab Setting Wireless Network PreferencesEnable Radio Available NetworksAdd, Remove Using the Belkin Wireless LAN UtilitySystem Tray Icon PropertiesAccess Point Infrastructure Networks Only Any Available Network access point preferredComputer-to-Computer Ad-Hoc Networks Only WEP Wired Equivalent Privacy Securing your Wi-FiNetworkEncryption Methods Bit WEPEncryption Keys Bit EncryptionC3 03 0F AF 0F 4B B2 C3 D4 4B C3 D4 E7 = 128-bit key WPA Wi-Fi Protected Access Network key= Wrong Password Changing the Wireless Security SettingsBit WEP Encryption WEP SetupC3 03 0F AF 0F 4B B2 C3 D4 4B C3 D4 E7 = 128-bit WEP key WPA-PSK no server WPA with server Settings Using the Belkin Wireless LAN Utility Using the Belkin Wireless LAN Utility Using the Belkin Wireless LAN Utility Using the Belkin Wireless LAN Utility Monitoring the Status of your Network Connection Client IP Address SignalNetwork Connection Type Radio StateClick on the Statistics tab Monitoring Data TransferFinding Available Networks in your Area Click on the Diagnostics tab Performing Diagnostic Tests on your ConnectionControl Registers Sprom Format VersionLoopback Test Interrupt TestLED Test Can’t connect to the Internet wirelessly TroubleshootingName of your wireless network appears in Available Networks Installation CD-ROM does not start Setup Utility TroubleshootingPower LED does not come on Card is not working Link LED is solid but cannot connect to the Internet Data transfer is sometimes slow Signal strength is poorTroubleshooting Troubleshooting What’s the difference between 802.11b, 802.11g and 802.11a? Wireless ComparisonEurope 00 800 223 55 Australia 1800 666 Technical SupportInformation Information Section Belkin Corporation Belkin Components B.V Belkin Tech Support