Belkin F5D7011 manual Information

Page 45

Information

FCC Statement

DECLARATION OF CONFORMITY WITH FCC RULES

FOR ELECTROMAGNETIC COMPATIBILITY

We, Belkin Corporation, of 501 West Walnut Street, Compton, CA 90220, declare under our sole responsibility that the product,

F5D7011

to which this declaration relates,

complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Caution: Exposure to Radio Frequency Radiation.

The radiated output power of this device is far below the FCC radio frequency exposure limits. Nevertheless, the device shall be used in such manner that the potential for human contact normal operation is minimized.

When connecting an external antenna to the device, the antenna shall be placed in such a manner to minimize the potential for human contact during normal operation. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation.

Federal Communications Commission Notice

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

1

2

3

4

5

6

7

8

9

10

section

43

Image 45

Contents High-Speed Mode Wireless G Notebook Network Card Table of Contents Introduction Advantages of a wireless networkIntroduction Placement of your Wireless Router or Access PointCordless Phone Placement Choose the quietest channel for your wireless networkAvoid Obstacles and Interference Secure connections, VPNs, and AOL Overview Product FeaturesProduct Specifications OverviewApplications and Advantages System Requirements Package ContentsInstall the Software Installing and Setting up the CardPlug the Card in an Available CardBus Slot of your Laptop Let Windows Finish the Installation Installing and Setting up the CardInstallation is now complete How to Access the Belkin Wireless LAN Utility Using the Belkin Wireless LAN UtilityClick on the Wireless Networks tab Setting Wireless Network PreferencesEnable Radio Available NetworksAdd, Remove Using the Belkin Wireless LAN UtilitySystem Tray Icon PropertiesAny Available Network access point preferred Access Point Infrastructure Networks OnlyComputer-to-Computer Ad-Hoc Networks Only WEP Wired Equivalent Privacy Securing your Wi-FiNetworkEncryption Methods Bit WEPBit Encryption Encryption KeysC3 03 0F AF 0F 4B B2 C3 D4 4B C3 D4 E7 = 128-bit key WPA Wi-Fi Protected Access Network key= Wrong Password Changing the Wireless Security SettingsBit WEP Encryption WEP SetupC3 03 0F AF 0F 4B B2 C3 D4 4B C3 D4 E7 = 128-bit WEP key WPA-PSK no server WPA with server Settings Using the Belkin Wireless LAN Utility Using the Belkin Wireless LAN Utility Using the Belkin Wireless LAN Utility Using the Belkin Wireless LAN Utility Monitoring the Status of your Network Connection Client IP Address SignalNetwork Connection Type Radio StateClick on the Statistics tab Monitoring Data TransferFinding Available Networks in your Area Click on the Diagnostics tab Performing Diagnostic Tests on your ConnectionControl Registers Sprom Format VersionInterrupt Test Loopback TestLED Test Can’t connect to the Internet wirelessly TroubleshootingName of your wireless network appears in Available Networks Troubleshooting Installation CD-ROM does not start Setup UtilityPower LED does not come on Card is not working Link LED is solid but cannot connect to the Internet Data transfer is sometimes slow Signal strength is poorTroubleshooting Troubleshooting What’s the difference between 802.11b, 802.11g and 802.11a? Wireless ComparisonEurope 00 800 223 55 Australia 1800 666 Technical SupportInformation Information Section Belkin Corporation Belkin Components B.V Belkin Tech Support