Belkin F1DP101M user manual Auto Video Adjust, To adjust the video automatically

Page 43

Using the Remote IP Device

Fig. 18 Manual Video-Adjust Bar

Auto Video Adjust

To adjust the video automatically:

1.Open Internet Explorer (or similar) in the background.

2.In the quick-access toolbar, click .

3.Select “Auto video adjust”.

The process will take a few seconds. If the process runs for more than three seconds, there may be an abnormal noise level. Check the video cable and verify that no dynamic-video application is running on the target server’s desktop.

Perform this procedure where necessary for each target server or new screen resolution.

1

2

3

4

5

6

7

8

9

section

40

Image 43

Contents OmniView SMB Remote IP Device Table of Contents Using the Remote IP Device Introduction Package ContentsOverview FeaturesFirmware Updates Video ResolutionDigital Collaboration Cables Equipment RequirementsSystem Requirements KVM SwitchesHost Computer Operating-System OS Platforms Remote-Console Software KeyboardsMice MonitorsFront View Unit Display DiagramsBack View Specifications Pre-Configuration Hardware InstallationWhere to place the IP Device MAC Address Device Number Mounting the IP Device optionalConnecting the Console to the IP Device Hardware InstallationConnecting the KVM Switch or Server to the IP Device Connecting to a KVM Switch Connecting to a Server Powering Up the Systems Initial Settings Remote InstallationIdentifying the IP Address To log into the web interface Logging into the Web InterfaceRemote Installation Device Name Network ConfigurationThree TCP Ports Set a Static IP Enable DhcpAdministrator User SettingsUser To add a new user View OnlyTo block a user To edit a userTo delete a user Blocking a standard user and View Only userSwitch-Configuration Switch ConfigurationTo install the SDF Installing new Switch-Definition Files SDFsTo specify and name servers To configure your serial device Serial SettingsPassword Policy Security SettingsAccount Blocking To install an SSL certificate Idle TimeoutSSL Certificate Firmware Upgrade To upgrade firmware MaintenanceTo restore factory settings Restore Factory SettingsLogging Out Starting a Remote Session Using the Remote IP DeviceTo start a remote session To work in full-screen mode Full-Screen ModeMoving or Hiding the Quick-Access Toolbar Using the Quick-Access ToolbarDisconnecting the Remote Session Mouse-Pointer Calibration Mouse Configuration and SettingsMouse-Pointer Alignment To align mouse pointersYou must manually synchronize the mouse pointers if Manual SettingsTo manually synchronize mouse pointers Mouse-Pointer Options Windows XP Advanced-Mouse Emulation To change the mouse-emulation settings To transmit a keyboard sequence Keyboard Configuration and Settings To add a keyboard sequence Add-Special-Key Box To record a keyboard sequenceTo adjust the video manually Video Configuration and SettingsManual Video Adjust To refresh the video settingsTo adjust the video automatically Auto Video AdjustTo change the bandwidth settings Performance Settings BandwidthTo connect to a different server Selecting a ServerAdditional Features To restore factory defaults Restoring Factory DefaultsWhat operating systems does the IP Device support? Frequently Asked QuestionsSection Problem TroubleshootingSolution Video quality is bad and/or grainy Glossary Glossary Information Belkin International, Inc., Limited 2-Year Product WarrantyFCC Statement How to get service Belkin B.V