Belkin F1DA104T user manual PRO2 Series FAQs

Page 30

PRO2 SERIES FAQs

Q:How far can the computer be from the PRO2?

A:When using PS/2 connections, the PRO2 can be up to 25 feet away from your computer. If your computer needs to be more than 25 feet (7.5 meters) from the PRO2, you can use the Belkin CAT5 Extender to extend your PS/2 keyboard, PS/2 mouse, and monitor up to 500 feet away using a standard CAT5 UTP cable. When using USB connection between your PRO2 and computer, we recommend that your computer be no more than 15 feet (5 meters) from the PRO2.

Q:What is the maximum video resolution that the PRO2 supports?

A:The advanced video circuit in the PRO2 supports a maximum resolution of 2048x1536@85Hz.

Q:What video bandwidth does the PRO2 support?

A:The PRO2 supports 400MHz of video bandwidth.

Q:Can PS/2 and USB connections be used simultaneously on the same port?

A:No. You must use one or the other for each CPU’s dedicated port on the PRO2.

Q:Do I have to install any software to use the PRO2?

A:No, the PRO2 does not require any drivers or software to be installed in your computers. Simply connect all your computers to the PC ports on the PRO2, then attach one keyboard, monitor, and mouse to the Console port and it is ready for use.

28

Image 30
Contents OmniView TA B L E O F C O N T E N T S OverviewPackage Contents OmniViewFeature Overview E RV I E WLED Display Equipment RequirementsFront-Panel Push Button Seven-Segment LED DisplayOperating Systems Side View of the PRO2 Front View of the PRO2 Back View of the PRO2Specifications Max. Resolution 2048x1536@85Hz Bandwidth 400MHzPre-Configuration STA L L AT I O NCable Distance Requirements Step-by-Step Installation Guide Installing the PRO2 into a Server RackBracket Installation F1DA108T and F1DA116T only Single PRO2 Installation Connect the Computer PS/2 Installation USB InstallationConnecting Multiple PRO2s Daisy-Chaining USB cablesBank DIP Switch Configuration Chart DIP SWITCH#Before You Begin InstallationConnecting the Master Switch to the First Slave Switch Adding Additional Slave UnitsExample of Daisy-Chain Configuration Connecting the ComputersPowering up the Systems Using Your PRO2Selecting a Computer Using Keyboard Hot Key Commands + +I N G YO U R K V M SW I T C H AutoScan ModeSelecting a Computer Using Direct-Access Port Selectors Bank Up and Bank Down Scroll ButtonsKeyboard Hot Key Commands On-Screen Display Menu Control OSD Display Time To update the firmware, you will need the following itemsAutoScan Time Updating FirmwareConnecting Computers Setting the PRO2 into Flash ModeBelkin KVM Switches and Accessories OmniView KVM SwitchesMATRIX2 OmniView All-In-One KVM Cables USBOmniView Accessories and Adapters PRO2 Series FAQs PRO2 Series FAQs PRO2 Series FAQs Troubleshooting GeneralVideo Keyboard MouseMouse is not detected at boot-up USB WARRANTY, FCC , CE, Ices Statement F1DA104T, F1DA108T, F1DA116TP73782-A