Belkin F1DA104T user manual Keyboard, Mouse

Page 33

T R O U B L E S H O O T I N G

Keyboard

The computer does not detect a keyboard and I get a keyboard error reported at boot up.

Check that the keyboard cable between the PRO2 and the computer is completely connected. Tighten any loose connections.

Try using a different keyboard.

Try connecting the computer to a different port.

If you are using the keyboard software that was included with your keyboard, uninstall it and then reinstall the standard Microsoft keyboard driver.

Mouse

The mouse is lost when I switch to a different port.

Check that the mouse you are using is connected properly to the Console of the PRO2.

If you are using a mouse driver that was included with your mouse, uninstall it and install the standard Microsoft mouse driver.

Disconnect and reconnect the mouse cable attached to the channel with which you are experiencing problems to re-synchronize the mouse connection.

Make sure the mouse works when directly plugged into the computer.

If the computer is coming out of standby mode, allow up to one minute to regain mouse function.

De-activate power-management schemes on the PC with which you are experiencing problems.

Try a different mouse.

31

Image 33
Contents OmniView Overview TA B L E O F C O N T E N T SOmniView Package ContentsE RV I E W Feature OverviewFront-Panel Push Button Equipment RequirementsLED Display Seven-Segment LED DisplayOperating Systems Side View of the PRO2 Back View of the PRO2 Front View of the PRO2Max. Resolution 2048x1536@85Hz Bandwidth 400MHz SpecificationsPre-Configuration STA L L AT I O NCable Distance Requirements Step-by-Step Installation Guide Installing the PRO2 into a Server RackBracket Installation F1DA108T and F1DA116T only Single PRO2 Installation USB Installation Connect the Computer PS/2 InstallationUSB cables Connecting Multiple PRO2s Daisy-ChainingDIP SWITCH# Bank DIP Switch Configuration ChartConnecting the Master Switch to the First Slave Switch InstallationBefore You Begin Adding Additional Slave UnitsConnecting the Computers Example of Daisy-Chain ConfigurationUsing Your PRO2 Powering up the Systems+ + Selecting a Computer Using Keyboard Hot Key CommandsSelecting a Computer Using Direct-Access Port Selectors AutoScan ModeI N G YO U R K V M SW I T C H Bank Up and Bank Down Scroll ButtonsKeyboard Hot Key Commands On-Screen Display Menu Control AutoScan Time To update the firmware, you will need the following itemsOSD Display Time Updating FirmwareSetting the PRO2 into Flash Mode Connecting ComputersOmniView KVM Switches Belkin KVM Switches and AccessoriesMATRIX2 USB OmniView All-In-One KVM CablesOmniView Accessories and Adapters PRO2 Series FAQs PRO2 Series FAQs PRO2 Series FAQs Troubleshooting GeneralVideo Mouse KeyboardMouse is not detected at boot-up USB F1DA104T, F1DA108T, F1DA116T WARRANTY, FCC , CE, Ices StatementP73782-A