Belkin PF40L, PF31L, PF30L user manual Step Connect your Coaxial Cables/DSS Lines

Hookup and Installation

Step 6

Connect your Coaxial Cables/DSS Lines

Your PureAV Power Conditioner comes with three pairs of coaxial-cable connections to protect your system from dangerous electrical disturbances that can travel down your coaxial-cable lines.

A.Cable TV – Connect the incoming cable television coaxial-cable line to the connector labeled “Cable IN”. Connect one end of a second coaxial cable to the connector labeled “Cable OUT”. Connect the other end of this cable to your cable TV tuner.

B.Satellite (DSS) TV – Connect the incoming satellite television coaxial-cable line to the connector labeled “SAT IN”. Connect

one end of a second coaxial cable to the connector labeled “SAT OUT”. Connect the other end of this cable to your satellite TV tuner.

C.HDTV, Broadband, or other Coaxial-Cable Lines – Connect any other incoming cable lines you want to protect to the connector labeled “AUX IN”. Connect one end of a second coaxial cable to the connector labeled

“AUX OUT”.

Note: We have included labels for the “Coax IN” and “Coax OUT” lines if needed for better organization.

PureAV Power Conditioner