Belkin PF30L, PF31L, PF40L user manual Step Connect your Pay-Per-View/Phone Line

PureAV Power Conditioner

Hookup and Installation

Step 5

Connect your Pay-Per-View/Phone Line

Your PureAV Power Conditioner comes equipped with Pay-Per-View/phone-line protection with a built-in splitter. These are standard RJ11 phone jacks and are labeled “Phone”.

A.Connect one end of your telephone cable to the wall outlet to which you normally connect your phone line. Connect the other end of your telephone cable to the Power Conditioner phone jack labeled “IN”.

B.Connect one end of the PureAV phone cable (included) to the Power Conditioner phone jack labeled “OUT”. Connect the other end of this cable to the Pay-Per-View phone jack on your DSS receiver.

C.To connect a telephone – Connect one end of another phone cable to the other Power Conditioner phone jack labeled “OUT”. Connect the other end of this cable to the telephone you want to use.

Note: We have included labels for the “Phone IN” and “Phone OUT” lines if needed for better organization.