PureAV Power Conditioner
Hookup and Installation
Step 2
Connect Audio Components to the Audio Filter (switched)
Certain components do not need to be, or should not be, powered on at all times. For this reason, the audio filter outlets are “switched” and can be controlled with the button situated on top of the Power Conditioner unit labeled “Switched”. When you depress and hold this button for approximately two seconds, the “Switched On” light will illuminate and power will flow to the switched outlets. To turn off the switched outlets, simply push and hold the “Switched” button again until the “Switched On” light is extinguished. Power will stop flowing to the switched outlets.
A.Attach PureAV power cord labels to each component’s power cord before you plug the cord into the corresponding outlet on the
Power Conditioner.
B.Receiver (Preamp) – Connect your receiver or preamp power cord to the outlet labeled “Receiver”.
C.Tape – Connect your tape player power cord to the outlet labeled “Tape”.
D.CD – Connect your CD player power cord to the outlet labeled “CD”. (PF30L, PF31L only)
E.Auxiliary 01 – This outlet can be used to connect any other audio equipment you may have. (PF30L, PF31L only)
F.Amp – Connect your main amplifier power cord to the outlet labeled “High Current AMP”. This outlet is specifically designed to deliver high current to
Step 3
Connect Video Components to the Video Filter (always on)
Certain components should be powered at all times. For this reason, the video filter outlets are “always on” or
A.Attach PureAV power cord labels to each component’s power cord before you plug the cord into the corresponding outlet on the
Power Conditioner.
B.Cable/Satellite – Connect your cable or satellite receiver power cord to the outlet labeled “Cable/SAT”. (PF30L, PF31L only)
C.VCR – Connect your VCR power cord to the outlet labeled “VCR”.
D.DVD – Connect your DVD power cord to the outlet labeled “DVD”. (PF30L, PF31L only)
E.TV – Connect your TV or monitor power cord to the outlet labeled “TV/Monitor”.
F.Digital Video Recorder – Connect your digital video recorder power cord to the outlet labeled “DVR”. (PF31L only)
G.Auxiliary 02 – This outlet can be used to connect any other video equipment you may have. (PF30L, PF31L only)
7