LOCAL ACCESS
Table of Contents | sections | 1 | 2 |
The Settings window – F2
Press “F2”.. The Settings window appears (see Figure 30)..
Figure 30 Settings window
In the Settings window, navigate downward using the “Tab” key.. At the bottom of the window, press “Tab” to go to the top of the window.. Change settings by typing in the selected area or by pressing the space bar, whichever is relevant..
From this window, you can do the following:
Changing the network parameters from the OSD is explained with the initial configuration in the “Setting the IP Address” section on page 13..
3 | 4 | 5 |
HOT KEY – Pressing “Scroll Lock” twice in quick succession will make the OSD appear.. You can replace “Scroll Lock” with any of the other hot-key options following:
•Ctrl, Ctrl (left Ctrl key only)
•Ctrl, F11 (left Ctrl key only)
•Print Screen
Press the space bar to toggle between options.. To display the OSD in the future, press the new hot key..
KEYBOARD LANGUAGE – Press the space bar to toggle between the language options.. It can be changed to French or German..
OmniView® SMB CAT5 216/232 Switch | 28 |