Belkin PM00019 -F1DP2XXA manual Setting the IP Address, OSD Main window

Page 15

INSTALLATION

Table of Contents

sections

1

2

Setting the IP Address

By default, the Switch boots with an automatically assigned IP address from a DHCP (Dynamic Host Configuration Protocol) server on the network.. The DHCP server provides a valid IP address, gateway address, and subnet mask..

You can identify the IP address from the OSD at the local position.. You can set the IP address locally via the OSD where there is no DHCP server as follows:

1.From the local keyboard, press “Scroll Lock”.. The OSD Main window appears (see Figure 10)..

3

4

5

2.Press “F2”.. The Settings window appears (see Figure 11)..

Figure 11 Settings window

In the Settings window, navigate downward using the Tab key.. At the bottom of the window, press “Tab” to go to the top of the window.. Change settings by typing in the selected area or by pressing the space bar—whichever is relevant..

Figure 10 OSD Main window

OmniView® SMB CAT5 216/232 Switch

13

Image 15

Contents OmniView SMB CAT5 216/232 Switch Table of Contents Sections IntroductionIntroduction Key FeaturesUser-Friendly Interface System Requirements System ContentsBelkin UTP Patch Cables TerminologyOmniView SMB Server Interface Modules CAT5 CablesLED and button table Unit Display DiagramsConnector table Connector FunctionAvoiding general rack-mounting problems Pre-Installation GuidelinesRack-mounting the SMB CAT5 Switch InstallationIllustrates the Switch’s system overview Connecting the SystemUSB SIM2 part no.. F1DP101A-AU Server Interface Modules SIMsConnecting a USB SIM Connecting a PS/2 SIMConnecting the power supply Connecting to the networkConnecting the CAT5 cables Connecting the local consoleOSD Main window Setting the IP AddressChanging the network parameters SSL certificate notes Logging In to the Web InterfaceLogging WEB InterfaceNetwork Configuration Configuring the SystemLAN Administration User SettingsView only AdministratorAdding a user UserBlocking a user Administration Server Name EditEditing a user Deleting a userSecurity Settings Administration Server Access ListPassword Policy Security SSL CertificateStandard High security policy Security policy Maintenance SIM Upgrade Maintenance Switch UpgradeSet Time and Date Restore Factory SettingsSaving Changes and Logging Out Back Up and RestoreOSD Navigating the OSD Main windowSelecting a computer Moving the Confirmation label F1 Tuning F5Settings window F2 Updating the DDC information DDC F10 Saving changes to the settingsAdditional Information Technical SpecificationsProduct Registration SafetyCE Declaration of Conformity InformationFCC Statement F1DP216A, F1DP232AHow to get service What this warranty coversWhat will we do to correct problems? What is not covered by this warranty?How state law relates to the warranty 4350