Sanyo DSR-5009P 125, „ User levels and privileges, Setting user, LV1 LV2 LV3 LV4

3GENERAL SET

13 Turn the jog dial to select the camera control level and then turn the shuttle dial clockwise.

Select a level to control cameras from the digital video recorder. (JP.112)

		<NETWORK CONTLOR SET>
		NETWORK CONTROL	: ON
		NETWORK STATUS	: ON
		OPERATION AUTHORITY	: CHANGE
		COPY/DOWNLOAD	: LV3,4
		CAMERA CONTROL	: LV2,3,4
		USER ID SET	->
	LV1:LIVE, LV2:PLAY, LV3:REC, LV4:MENU SET
[Settings] (‹ indicates default setting)
Setting		Description
‹LV2, 3, 4	Allows users at Level 2 or higher to control
	cameras from the digital video recorder.
LV3, 4	Allows users at Level 3 or higher to control
	cameras from the digital video recorder.
LV4	Allows users at Level 4 to control cameras
	from the digital video recorder.

14 Press the [EXIT/OSD] button.

The setting is completed and the display returns to the normal screen.

EXIT/OSD

Setting user ID

Set a user ID and password to restrict operation of the digital video recorder directly or through the network.

„User levels and privileges

Select from the following four user levels.

Level	LV1	LV2	LV3	LV4
privilege
Monitoring	*1
Playback/
searching
Recording
Menu operation
Monitor control
Concurrent	16 users*2	3 users	1 user at LV3 or LV4
		3 users at LV2, LV3 and LV4
connection
restriction	16 users	including a user for the DVR (1 user
	for the DVR)

*1 Masked video cannot be monitored.

*2 However, the maximum number may not be possible depending on the network conditions and the number of screens displayed.

Setting user

		<USER	ID SET>
USER ID	PASSWORD LV		USER ID PASSWORD LV
ID4-----	4444----	4	-------- -------- -
ID3-----	3333----	3	-------- -------- -
ID2-----	2222----	2	-------- -------- -
ID1-----	1111----	1	-------- -------- -
--------	-------- -		-------- -------- -

-------- -------- - -------- -------- -

-------- -------- - -------- -------- -

-------- -------- - -------- -------- -

LV1:LIVE, LV2:PLAY, LV3:REC, LV4:MENU SET

Use the following procedure to set the user ID, password and level.

The user ID must be between one and eight alphanumeric characters, and the password between four and eight alphanumeric characters.

Characters that can be entered: 0 to 9, A to Z

The operation is the same as “Setting user” (JP.112) from “Security lock settings”.

Change “NETWORK CONTROL” user ID, password, and level (settings described on this page) to change the values in the “USER ID SET” screen of “SECURITY LOCK SETTINGS”.

English 125