Sanyo DSR-5009P 143, Set the areas in frame 2 and frame 3 in the same way, Cursor moves to T-1

8ADVANCED MENU SET

5 Turn the shuttle dial clockwise.

Area settings mode is activated and an icon appears in the upper right part of the screen.

Icon

2

1

3

CH-01 T-1 LEVEL: OFF TIME LAG: OFF

6 Turn the jog dial to move the cursor (the orange †) to the upper left of the position where an area is to be set and then turn the shuttle dial clockwise.

The cursor moves to the bottom right.

2

FUNC. 3

CH-01 T-1 LEVEL: OFF TIME LAG: OFF

Turn the jog dial to move the cursor to the left or right. Press the [FUNC.] button and turn the jog dial to move the cursor up or down.

7 Turn the jog dial to move the cursor (the orange †) to the lower right of the position where an area is to be set and then turn the shuttle dial clockwise.

The cursor (the orange †) moves to the top left of frame 2.

2

1

FUNC. 3

CH-01 T-1 LEVEL: OFF TIME LAG: OFF

Turn the jog dial to move the cursor to the left or right. Press the [FUNC.] button and turn the jog dial to move the cursor up or down.

8 Set the areas in frame 2 and frame 3 in the same way.

The cursor moves to “T-1”.

2

1

3

CH-01 T-1 LEVEL: OFF TIME LAG: OFF

zTurn the shuttle dial counter-clockwise to return to the previous operation.

9 Press the [EXIT/OSD] button.

The setting is completed and the display returns to the normal screen.

EXIT/OSD

zIf areas coincide, the smaller area number is prioritized.

zLarge ROI size decreases ROI effectiveness.

English 143