Sanyo DSR-5009P instruction manual 165, Adjusting the image and audio

2WATCHING IMAGES

Live mode image (multi-screen display)

	(6)			(8)	(9)	(10)
	LIVE	NORMAL RECORDING MODE		STOP
		ALARM RECORDING MODE		STOP
(7)
	01-01-05 00: 37: 58	USER ID	ID4	LV1:0 LV2:0 LV3:0 LV4:1
	01	02	HALL 4F 03
	04	05	06
	07	08	09
	READ INTERVAL : 1	SIZE : 1	QUALITY : 3	SET

(1) (2) (3)

			Play mode image (full-screen display)
	(6)			(11)			(8)	(9)	(12)
	PLAY				NORMAL RECORDING MODE		STOP
(7)					ALARM RECORDING MODE		STOP
		01-01-05		00: 36: 20	PLAYBACK AREA	NORMAL		SPEED	PLAY

				01
(1)
	READ INTERVAL :		1	SIZE		:	1
	AUDIO	:	OFF		----			SAVE TO PC :	OFF	SET
		(4)				(2)			(5)

Adjusting the image and audio

Use the following procedures to adjust the images displayed on screen.

To make an adjustment, select the adjustment setting from the menu and then click [SET] from the pull-down menu on the screen.

(1)READ INTERVAL (Default setting: 1) Select one of five image display speeds.

Larger setting numbers correspond to higher speeds; however, the actual speed depends on the speed of your network connection.

* When “(4) AUDIO” is set to “ON”, “READ INTERVAL” cannot be set.

(2)SIZE (Default setting: 1)

Select one of six image sizes.

Larger setting numbers correspond to larger image sizes. [Settings] (‹ indicates default setting)

‹1	320 x 240	4	800 x 600
2	400 x 300	5	1,024 x 768
3	640 x 480	6	1,280 x 960

* Size for full screen monitoring.

(3) QUALITY (Default setting: 3)

Four levels of picture quality can be set for live images (live mode only).

The recorded image is not displayed during playback. [Settings] (‹ indicates default setting)

1Lowest quality

2Standard quality

‹3	Fine
4	Best quality

(4) AUDIO (Default setting: OFF)

Change the audio channel for the device connected to the AUDIO1 IN terminal on the unit’s rear cover.

Listen to the current audio from the device connected to the AUDIO1 IN terminal while displaying live image.

Play audio from the device connected to the AUDIO1 IN terminal at the time of recording while playing back a recorded image.

[Settings] (‹ indicates default setting)

Setting	Description
‹OFF	Audio is not played.
	Play audio from the device connected to
A1	the AUDIO1 IN terminal on the unit’s rear
	cover.
	Play audio from the device connected to
A2	the AUDIO2 IN terminal on the unit’s rear
	cover.
	Play audio from both the AUDIO1 IN
A12	terminal and the AUDIO2 IN terminal on
	the unit’s rear cover.

Select the audio delay time (buffering time).

Audio data is loaded to the computer (buffered) for a given amount of time to ensure that there are no playback interruptions. The playback audio is delayed when compared with the originally recorded sound. The following set amounts of time indicate the delay.

[Settings] (‹ indicates default setting)

	Setting	Description
‹5SEC		Set the audio delay (5, 10, 15, 20 or 30
	10SEC	seconds) to play audio.
	15SEC	In Play mode, the speed of fast-forward
	20SEC	and frame advance may be affected by
		the network environment being used.
	30SEC
		In addition, if the audio-data reading
	Screen indicating	screen appears frequently, the audio
		delay (5, 10, 15, 20 or 30 seconds)
	the reading of
		should be lengthened to match the
	audio data
		network environment.
		If this screen continues to appear
		frequently even when the delay time is 30
		seconds, it indicates that audio playback
		is not possible with the network
		environment being used.

English 165