Sanyo DSR-5009P instruction manual ‹Off

5SEARCHING FOR RECORDED VIDEO

(3)Turn the jog dial to set the end date and time for motion sensing (i.e., 8 PM on the same day) and then turn the shuttle dial clockwise.

The cursor moves to “MOTION SENSOR”.

	< MOTION DETECTION SEARCH >
	SEARCH FROM : NORMAL		/ CHANNEL : --
	START :
	12-09-03 10:00
Set the	END :
	12-09-03 20:00
end date	MOTION SENSOR	->
and time.	PREVIEW	->
	VIEW	->
	MOVE:JOG		SELECT:SHUTTLE

2 Turn the shuttle dial clockwise.

The motion sensor setting screen is displayed.

Use the following procedure to set to detect a given range with the motion sensor.

(1)Turn the jog dial to move the starting position to the desired detection range and then turn the shuttle dial clockwise.

“ ” changes to a yellow “„”.

LEVEL:OFF EXIT

(2)Turn the jog dial to move left and right.

(3)Press the [FUNC.] button.

Cursor movements can be changed from left and right to up and down.

FUNC.

LEVEL:OFF EXIT

(4) Turn the jog dial to move up and down.

(5)Turn the shuttle dial clockwise. The yellow areas change to gray.

LEVEL:OFF EXIT

3 Turn the jog dial to select “LEVEL” and then turn the shuttle dial clockwise.

“OFF” flashes.

LEVEL:OFF EXIT

4 Turn the jog dial to select sensitivity and then turn the shuttle dial clockwise.

After the sensitivity level is set, the cursor moves to “EXIT”.

	LEVEL:OFF	EXIT
[Settings] (‹ indicates default setting)
Setting	Description
‹OFF	Motion sensing is not performed.
	Motion sensing is performed. Lower
1 to 10	numbers correspond to higher levels of
	sensitivity.

5 Turn the shuttle dial clockwise.

The display returns to the <MOTION DETECTION SEARCH> screen.

< MOTION DETECTION SEARCH >

SEARCH FROM : NORMAL		/ CHANNEL : --
START :
12-09-03 10:00
END :
12-09-03 20:00
MOTION SENSOR	->
PREVIEW	->
VIEW	->
MOVE:JOG		SELECT:SHUTTLE

English 47