Sanyo DSR-5009P instruction manual Operations during the specified time periods

1INITIAL SET

The above examples are set as follows.

<TIME PERIOD SET> screen

zTIME PERIOD A

T-1=6:00, T-2=13:00, T-3=20:00, T-4=00:00

zTIME PERIOD B

T-1=6:00, T-2=11:00, T-3=13:00, T-4=00:00

zSEQUENCE “TIME PERIOD A”

zMASK

“TIME PERIOD B”

<MAIN/MON.2 MONITOR SET> screen

zT-1

All “OFF”

zT-2

“OFF” except cameras No. 1, 5, 9 and 12

zT-3

“OFF” except cameras No. 1, 8 and 16

<MASK SET> screen

zT-1

“ON” for cameras No. 2, 4, 5, 7, 10 and 16.

zT-2

“ON” for cameras No. 1, 4, 6, 11, 12, 13 and 14.

zT-3

All “OFF”

Operations during the specified time periods

The following menu settings must be made to enable operation of the time periods. After completing these settings, be sure to then carry out the timer setting.

„Setting automatic selection of camera video

Select the camera to be automatically selected to display video and set the switching interval.

To do this, set “SEQUENCE SET” from the <SCREEN SET> screen. (JP.128)

		<SCREEN SET>
1.MULTI SCREEN			:	NORMAL
	QUAD POSITION SET			->
	MULTI	9 POSITION SET		->
	MULTI	16 POSITION SET		->
2.SEQUENCE SET
	FULL	: 1S	QUAD : 1S
	MAIN/MON.2 MONITOR SET			->
3.MASK			:	OFF
	MASK SET			->
4.COLOR LEVEL SET				->

„Masking camera video using a gray pattern

Use “MASK” from the <SCREEN SET> screen to specify which cameras are to be displayed on the monitor and which are not. (JP.130)

		<SCREEN SET>
1.MULTI SCREEN			:	NORMAL
	QUAD POSITION SET			->
	MULTI	9 POSITION SET		->
	MULTI	16 POSITION SET		->
2.SEQUENCE SET
	FULL	: 1S	QUAD : 1S
	MAIN/MON.2 MONITOR SET			->
3.MASK			:	OFF
	MASK SET			->
4.COLOR LEVEL SET				->

„Alarm recording using motion sensors

Set “MOTION SENSOR” from the <ALARM REC MODE SET> screen. (JP.99)

<ALARM REC MODE	SET>
ALARM RECORDING	: OFF
PICTURE QUALITY	: ENHANCED
PICTURE QUALITY SET	->
AUDIO RECORDING	: OFF
ALARM INTERLEAVE	: ONLY
REC RATE: 15FPS, DURATION: 20SEC
PRE-ALARM RECORDING	: ***
REC RATE: ***** FPS,	DURATION: *****
ALARM TRIGGER	: ALARM
MOTION SENSOR	->

SETTINGS

68 English