Sanyo DSR-5009P instruction manual 186, Record SET Alarm REC Mode SET, Click 6. Alarm REC Mode SET

3RECORD SET

6. ALARM REC MODE SET

Use the following procedure to set the recording conditions for alarm recording.

Setting alarm recording

Set the operation patterns and recording conditions to perform alarm recording.

1 Click the button on the operation panel.

The “MAIN MENU” is displayed.

2 Click “2. RECORD SET”.

The “RECORD SET” screen is displayed.

3 Click “6. ALARM REC MODE SET”.

The “ALARM REC MODE SET” screen is displayed.

ALARM REC MODE SET

4	ALARM RECORDING	: OFF
5	PICTURE QUALITY	: ENHANCED
6	AUDIO RECORDING	: OFF
7	ALARM INTERLEAVE	: ONLY
8	REC RATE : A 12.5 FPS	, DURATION: 20 SEC	9
10	PRE-ALARM RECORDING	: ***	12
11	REC RATE : A 12.5 FPS	, DURATION: 5 SEC
13	=>(813 ALARMS CAN BE RECORDED)
	ALARM TRIGGER	: ALARM

14
	SAVE

4 Set “ALARM RECORDING” to the desired recording mode.

[Settings] (‹ indicates default setting)

Setting	Description
‹OFF	Alarm recording is disabled.
	Alarm recording is always
ENABLED	performed regardless of timer
	recording or timer settings.
AL-REC ON TIMER	Alarm recording is performed only
	during timer recording.
	Alarm recording is performed only
AL-REC OFF TIMER	during recording other than timer
	recording.
	Alarm recording is performed only in
OLY AL-RC ON TMR	the period set for timer recording
	without timer recording actually
	being performed.

Setting the picture quality for recording

Use the following procedure to set the picture quality for alarm recording.

5 Set “PICTURE QUALITY”.

[Settings] (‹ indicates default setting)

Setting	Description
BASIC	Basic
NORMAL	Normal
‹ENHANCED	Enhanced
FINE	Fine
SUPER FINE	Super Fine
INDIV.	Picture quality is set for each camera.

„Setting the picture quality for each camera

(1)Set “PICTURE QUALITY” to “INDIV.”.

The “ALARM REC MODE SET” screen is displayed.

ALARM REC MODE SET

	ALARM RECORDING				: ENABLED
(1)	PICTURE QUALITY				: INDIV.
(2)	01	02	03	04	05	06	07	08
	EN	EN	EN	EN	EN	EN	EN	EN
	09	10	11	12	13	14	15	16
	EN	EN	EN	EN	EN	EN	EN	EN
(3)	AUDIO RECORDING				: OFF
	ALARM INTERLEAVE				: ONLY
	REC RATE : A 12.5 FPS				, DURATION: 20 SEC
	PRE-ALARM RECORDING				: ***

REC RATE : A 12.5 FPS	, DURATION: 5 SEC
=>(981 ALARMS CAN BE RECORDED)
ALARM TRIGGER	: ALARM

(4)
	SAVE

(2)Set the picture quality for each camera.

(3)Set “AUDIO RECORDING”, “ALARM INTERLEAVE”, “REC RATE”, “DURATION”, “PRE-ALARM RECORDING”, “REC RATE”, “DURATION” and “ALARM TRIGGER” (Jsteps 6 to 13).

(4)Click [SAVE].

NETWORK

SETTINGS

186 English