Sanyo DSR-5009P instruction manual 193, Click 7. Network SET, Change the settings as required

4GENERAL SET

z“***” is displayed and “PLAYBACK DRIVE” cannot be set when only one hard disk is being used or when “MIRRORING” is set to “OFF”.

zWhen this setting is made after expanding the hard disk, the hard disks are initialized and all recorded video is lost. If any important recordings are stored on the hard disks, they should also be stored on a separate data storage device before making this setting.

7. NETWORK SET

Network settings must be made in advance on the unit whenever it is to be controlled via a network. Once this is done, settings can then be changed from the controlling PC.

zChanging network-related settings

When these settings are modified, the connection is cancelled and control rights are returned to the unit. To reestablish the connection, reset the network settings on the PC to match the modified settings on the unit.

1 Click the button on the operation panel.

The “MAIN MENU” is displayed.

2 Click “3. GENERAL SET”.

The “GENERAL SET” screen is displayed.

3 Click “7. NETWORK SET”.

The “NETWORK SET” screen is displayed.

4 Change the settings as required.

	Item	Description
		Set from the digital video recorder
		whether the IP address is automatically
		acquired from the DHCP server or
(1)	DHCP	manually set. Set “ON” when using an IP
		address acquired automatically from an
		Internet service provider or a DHCP
		server on a LAN, and set “OFF” when
		using a fixed IP.
		Select “OFF” for “DHCP” to set. Generally,
		a private IP address is used when a fixed
(2)	IP ADDRESS	IP address is set in a LAN (example:
		192.168.0.0 - 192.168.255.255).
		Be sure not to duplicate IP addresses
		from other devices.
(3)	SUBNET	Select “OFF” for “DHCP” to set. The same
	MASK	value is set throughout the LAN.
		Select “OFF” for “DHCP” to set. Specifies
(4)	GATEWAY	the IP address of the device (on the LAN
		side) when linking a LAN to a WAN or
		another type of network.
(5)	PORT	Sets open port. Default value is “80”.
(6)	NETWORK	Sets restrictions for traffic in the LAN.
	SPEED	Normally, this is set to “NO LIMIT”.
		Set whether the DNS server IP address is
		automatically acquired or manually set.
	DNS	Generally this setting is “AUTO” when
(7)		“ON” is selected for “DHCP”. When the
	SERVER	DNS server address is specified by
		network administrator or Internet service
		provider, select “MANUAL” and set
		“PRIMARY” and “SECONDARY” below.
		Set the primary address and the
	PRIMARY	secondary address.
(8)		Set when “DNS SERVER” is set to
	SECONDARY	“MANUAL”. Set the DNS server address
		specified by the network administrator or

(1)

NETWORK SET

Internet service provider.

(9) HOST NAME Set the host name.

(2)	DHCP	: ON
	IP ADDRESS	: 192 .		168 .
(3)	SUBNET MASK	: 255 .		255 .
(4)	GATEWAY	: 0	.	0	.
(5)	PORT	: 80
(6)	NETWORK SPEED	: NO LIMIT
(7)	DNS SERVER	: AUTO
(8)	PRIMARY	: 0	.	0	.
(9)	SECONDARY	: 0	.	0	.
	HOST NAME	:
(10)	DOMAIN SUFFIX	:

0	.
255	.
0	.

0	.
0	.

1

0

0

0

0

(10)	DOMAIN	Set when specified by an Internet service
	SUFFIX	provider.

Contact the network administrator for more details on setting values.

MAC ADDRESS : 08-00-7B-81-22-4C

5 SAVE

English 193