Sanyo DSR-5009P instruction manual 203, Ntp Set

Set “LOGIN ID” under “DIAL UP”. Set “PASSWORD” under “DIAL UP”.

9ADVANCED MENU SET

zThe IP address automatically allocated by the Internet service provider is displayed after a dial-up connection for

“AUTO IP ADDRESS”.

4 Set “DIAL UP” to “ON” or “OFF”.

If no dial-up connection is to be used, select “OFF” and go to step 9.

If a dial-up connection is to be used, select “ON” and perform steps 5 to 8.

[Settings] (‹ indicates default setting)

Setting	Description
‹OFF	Dial-up connection is disabled.
ON	Dial-up connection is enabled.

5 Enter the telephone number of the provider in “PROVIDER TEL. NO.” under “DIAL UP”.

6

7

8 Set “AUTHENTICATION” under “DIAL UP” to an authentication protocol.

[Settings] (‹ indicates default setting)

Setting	Description
‹AUTO	PAP or CHAP authentication is detected
	automatically.
PAP	PAP authentication is used.
CHAP	CHAP authentication is used.

9 Set “DIAL IN” to “ON” or “OFF”.

If no dial-in connection is to be used, select “OFF” and go to step 15.

If a dial-in connection is to be used, select “ON” and perform steps 10 to 14.

[Settings] (‹ indicates default setting)

Setting	Description
‹OFF	Dial-in connection is disabled.
ON	Dial-in connection is enabled.

10 Set “LOGIN ID” under “DIAL IN”.

11 Set “PASSWORD” under “DIAL IN”.

12 Set “AUTHENTICATION” under “DIAL

IN” to an authentication protocol.

[Settings] (‹ indicates default setting)

Setting	Description
‹AUTO	PAP or CHAP authentication is detected
	automatically.
PAP	PAP authentication is used.
CHAP	CHAP authentication is used.

13 Set “IP ADDRESS” under “DIAL IN” to

the IP address of the digital video recorder.

14 Set “CLIENT IP ADDRESS” under “DIAL IN” to the IP address of the PC.

15 Set “CIRCUIT TYPE” to the type of phone line connected to the modem.

[Settings] (‹ indicates default setting)

Setting	Description
‹DTMF	Touch-tone line
PULSE	Rotary dial line

16 Set “MODEM INITI. COMMAND” to an AT command.

Enter an AT command to control the modem. Enter a command that begins with “AT” and specifies the modem manufacturer and then a command that switches flow control to software control.

17 Set “BAUD RATE”.

zUse the DATA SPEED of the connected modem.

18 Set “PARITY”.

19 Set “STOP BIT”.

20 Click [SAVE].

The setting is saved.

4. NTP SET

Use the following procedure to synchronize the time using the Internet or an NTP server on a LAN.

1 Click the button on the operation panel.

The “MAIN MENU” is displayed.

2 Click “8. ADVANCED MENU SET”.

The “ADVANCED MENU SET” screen is displayed.

English 203