198, Power LOSS/USED Time | Sanyo DSR-5009P guide

6POWER LOSS/USED TIME

1. POWER LOSS/USED TIME

Use the following procedure to check date and time of power losses, the amount of power-on time, and time of use for hard disk.

1 Click the button on the operation panel.

The “MAIN MENU” is displayed.

2 Click “5. POWER LOSS/USED TIME”.

The “POWER LOSS/USED TIME” screen is displayed.

POWER LOSS/USED TIME

(1)		POWER	LOSS		RECOVER
(1)		POWER	LOSS		RECOVER
	#007		20 - 10	19 : 51	20 - 10 19 : 53
			19 - 10 23 : 48		20 - 10 09 : 09
			19 - 10 23 : 48		20 - 10 09 : 09
			19 - 10 21 : 36		19 - 10 21 : 36
			19 - 10 20 : 47		19 - 10	20 : 48
			19 - 10 20 : 35		19 - 10	20 : 38
			19 - 10	20 : 26	19 - 10	20 : 26
			01 - 01	00 : 00	12 - 08	12 : 35

	(2)				INTERNAL HDD DISK1 USE		:	00023H
	(2)				INTERNAL HDD DISK1 USE		:	00023H
						DISK2 USE	:	00023H
						POWER	:	00023H
	(3)				FIRMWARE VER
						M : 0.12-00 S : 00.21-02 C : 00.00-09

				Item			Description

						Displays the number of power losses
	(1)	POWER				(#007) and the date and time of
	(1)	POWER				occurrence and recovery for the eight
						occurrence and recovery for the eight
						most recent power losses.

	(2)	INTERNAL HDD				Displays the power usage duration for
						each disk.
	(3)	FIRMWARE				Displays the firmware version.
	(3)	VER				Displays the firmware version.

zThe maximum number of power losses displayed is “999”.

NETWORK

SETTINGS

198

English

Image 199

Sanyo DSR-5009P instruction manual 198, Click 5. Power LOSS/USED Time

Contents

About this manual Digital Video Recorder with Multiplexer Function Avoiding Electrical Shock and Fire PrecautionService Location Introduction Main featuresAccessories Symbols used in this manual Contents Network Control Contents Settings Network Settings Contents Network Operation Contents Other Protection of the HDD Before USEHDD and cooling fan are consumable components Important recordings Before USE Backup battery DSR-5016P Names and Functions of PartsFront panel DSR-5009P Names and Functions of Parts Rear panel Power cord holder Sensor Alarm OUT terminalsALL Reset button AC power socket AC RS-232C Pin locations Installation and ConnectionsConnecting the RS-232C terminal Basic connections DSR-5016P Connecting RS-485 control terminals Installation and Connections Operation Connecting to a 2ND RS485/422 terminalRS-485 termination switch settings Connect as above LAN connection Connecting a LAN terminalConnecting an amplifier Connecting alarm input terminals Operation Connecting Sensor Alarm OUT terminalsConnecting control terminals Connecting the power cord Preparing for USE 01-01-05 000000 REC Repeat EN a AlarmOperation display Press the EXIT/OSD button Preparing for USEChanging the display position of the operation display area Changing the language Example Setting 830 on 26 October Setting the timeTurn the shuttle dial clockwise Archive area Hard disk archive areaHard disk recording areas Recording area Press the Zoom button during monitoring of camera video Monitoring Video from a CameraViewing on a full screen Press the No Camera Select button Press the Quad button Monitoring Video from a CameraViewing on quad screens Press the Zoom button to return to normal magnification Press the Plus button during multi 9 screen display Viewing on multi 9 or multi 16 screensEnlarging video Press the Multi button Press the Sequence button Setting automatic full screen selectionSetting automatic quad-screen selection Automatic camera selection Viewing on a full screen Viewing on monitorPress the MON2 button Viewing on a quad screen Monitor Main monitor Viewing on multi 9 or multi 16 screens MON2 indicator turns off Displaying alarm video in full screen formatMonitor Normal recording Timer recordingSet timer recording. JP.87 Press the Timer button Recording Pre-alarm recording Alarm recordingRecording Changing the playback speed PlayPlaying video on a full screen Fast-forward and fast-rewind playback Magnifying the playback video PlayPress the Zoom button during playback Frame advance forward/reverse Viewing still imagesPlaying video on multiple screens Press the Multi button during Playback To view video from other camerasVideo on full, quad, multi 9 or multi Screens Motion Detection Search JP.45 Searching for Recorded Video Searching for Recorded Video Alarm log search„ To confirm normal recording Search Alarm searchTotal Alarms DATE/TIME Search input field flashes Entering an alarm number to search for an alarm video„ To view pre-alarm video Search screen, press the FUNC. button and select Search Channel input field flashes Entering a camera number to search for an alarm videoPress the FUNC. button Cursor moves to the list Press the Alarm button during playback Alarm thumbnail searchTo view alarm video before or after the current playback Turn the jog dial to select the video for playback Search by entering an alarm numberSearch screen, press the FUNC. button Recording END Time/date searchSearch by entering a camera number Recording TOP Press the Camera Select 5 button Turn the shuttle dial clockwise while Channel is selectedSpecify the date and time Total Searching within the archive areaDate Start Motion Detection Search screen is displayed Entering an archive number to search for an alarm videoMotion detection search Cursor moves to Search Motion Sensor Setting the motion sensor for searchingStart END ‹OFF Set the motion sensor again Turn the jog dial to select Preview„ If not FOUND! is displayed Viewing video detected by the motion sensor Copying video to a CD-R/RW or DVD+R/+RW JP.54 Saving Copying Recorded VideoCopying video to the hard disk’s archive area JP.50 Copying video to a CompactFlash card or Microdrive JP.51 Set the time Saving Copying Recorded VideoCopying video to the hard disk’s archive area Press the Copy button Example Copying 20 images „ To cancel copyingCopying to a CompactFlash card or Microdrive Insert a CompactFlash card Maximum Turn the shuttle dial clockwise while Pictures is flashing Available space and write capacity are checked Viewing images copied to a CompactFlash card on a PC Connect a recordable CD or DVD drive and insert a disk Copying to a CD-R/RW or DVD+R/ +RWExample Copying the maximum video to the copy destination Cursor appears on Copy Start Number of images flashes ‹COMPACT Formatting a CompactFlash card, CD-RW orFlash Disc Writer Dcim Viewer YYMMDD99 Viewing images on a PC Turn the jog dial to select a function Menu Configuration and OperationsBasic menu operations Turn the jog dial to select an item Displayed settings are restored to their default values Menu Configuration and OperationsResetting menu items Movement and confirmation in sub-menus and setting screens Advanced Menu SET JP.138 Sets the ROI setting, alarm Sub-menu configurationPower LOSS/USED Time JP.133 Displays the date and time Copy Menu Settings JP.135 Stores and loads menu Initial SET Configuration Initial SET Setting the languageSetting the summer time Turn the jog dial to select Mode under Summer Time SET Summer time ends External clock settingSet the date and time Summer time begins Detecting connected cameras Flashes Default setting isExample Set to Example Setting the title HALL-1STFL for Camera No Setting camera titlesQuad Turn the jog dial to select H Setting holidaysExample Setting 26 October as a holiday Holiday SET screen is displayed Default setting is Set the day and month for item Setting time periods Operations during the specified time periods „ Setting automatic selection of camera video„ Masking camera video using a gray pattern „ Alarm recording using motion sensors Set the time for T-2 Timer period settingsExample 1 Setting periods using Time Period a Set the time for T-1 Time Period a flashes Timer period operations settingsCursor moves to Time Period a Record SET Record SET Normal recording easy setupSetting based on recording days Alarm Operation SET JP.102 Makes settings for Example Timer recording from 8 AM to 8 PM Set the time for timer recording Turn the shuttle dial counter-clockwise Setting based on recording rateExample on REC Rate Base 25 FPS/CAM Hard disk capacity Displaying the recording areasRecording Area SET screen is displayed Displays the total capacity of the hard disk Turn the jog dial to select YES „ Default hard disk settingsExample Setting the recording area to 50% Changing recording areas Recordings can now be made to the recording area Setting overwrite permission OFF Setting recording conditions‹ON Copy 01-01-05 000000 REC 5% EN a AlarmAuto Alarm ‹MANUAL Copy Setting auto deleting Setting normal recording Allowable „ Setting the picture quality for each cameraDefault setting OFF FPS flashes Select Individual Camera Rate Setting program recordingExample P-1 Program Recording rate is not set Program REC SET screen is displayedFlashes for Program Cursor moves to 01 under Select Individual Camera Rate FPS Timer setting items Timer settings Cursor appears in the bottom line Setting the Start and Stop timeIndicating the hour from Start flashes OFF flashes for SET EXT Use the same procedure to set other items„ To change a setting item To cancel all set timer reservations Line Make settings in the Week and Start columnsTimer recordings spanning more than 24 hours SAT in the Week column flashes OFF 5FPS Timer recording using an external timer Cursor moves to line Setting timer recording To set alarm recording Setting alarm recording Only flashes Cursor moves to Alarm Interleave ‹ONLY Cursor moves to PRE-ALARM Recording To set pre-alarm recordingNumber of alarms Alarm display Cursor moves to Alarm Trigger Pre-alarm recording is disabledPre-alarm recording is enabled Flashes Default setting 12.5FPS PRE display Setting alarm triggersNumber of alarms Use this setting to indicate how alarms are to be detected Level Setting the motion sensors Turn the shuttle dial clockwise twice Use the same procedure to set other sensor positions100 Turn the jog dial to select a or B 101 Setting time periodsSetting sensitivity levels Setting sensor modes To B Setting alarm operation and display102 „ To stop motion sensor recording 103 104 105 Canceling an alarm HDD SET JP.117 RS-232C/RS-485 SET JP.115 Makes settings whenGeneral SET 106 107 Setting data displayGeneral SET 108 Setting display for video lossOn flashes for Video Loss 109 Setting the buzzer 110 Setting the security lock LV4 111‹NORMAL Change Registering a user Setting user ID112 „ User level and privileges Enter a user ID Enter a passwordTurning on the key lock, password lock and network lock 113 Confirm the lock status During password lock, pressEnter the user ID and password 114 RS-485 flashes Setting RS-232C and RS-485115 RS-232C/RS-485 SET screen is displayed 116 Initializing the hard disk Setting mirroring117 Hard disk initialization and mirroring ‹MASTER 118 119 Switching playback disksExpanding Replacing and initializing the hard disk 120 Network settingsMaking network settings Switch Set Gateway 121Set IP Address Set Subnet Mask Set Http Port 122 123 Making network control settings 124 LV1 LV2 LV3 LV4 Setting user125 „ User levels and privileges Screen SET Setting quad and multi 9/16 display126 Screen SET 127Checking modified screen positions Automatic selection is set to an interval of 5 seconds 128Screen SET screen is displayed 1S flashes for Full Cursor moves to 1S for 01 and Main MON 129MAIN/MON.2 Monitor SET screen is displayed Flash for Time Period Channel not displayed Setting masks‹ 1S 30S Switching interval seconds 130 131 Use the same procedure to set other channels Color Level SET screen is displayed Setting the color levelSettings The default setting is 132 133 Power LOSS/USED TimeSelect Used Time and then turn the shuttle dial clockwise Action Initialization LOG134 Area 135 Copy Menu SettingsSaving menu settings Copy Menu Settings screen is displayed Jog dial 136 Copy Menu SettingsLoading menu settings Copy Menu Settings screen is displayed Cursor appears on Save Menus to CF Copying the recording area settingsUse the following procedure to copy recording area settings 137 138 Advanced Menu SET Advanced Menu SET Setting ROISetting the ROI 139 140 141 Response sensitivity is disabledResponse sensitivity is enabled. Lower Set Time LAG to OFF when Level is set English 1S 10S Setting ROI areas142 No operation after the response-stop Cursor the orange † moves to the top left of frame 143Set the areas in frame 2 and frame 3 in the same way Cursor moves to the bottom right 144 Setting alarm notification Sanyo COAX2 Camera control settings145 Sanyo COAX1 Sanyo Coax Sanyo RS485 BBV Coax Pelco Coax 146 Operating the camera with the digital video recorder Making PPP settings147 Click the buttons to operate the camera 148 GMT Dublin, Lisbon, London flashes Time zone/NTP setting149 Time Zone SET / NTP SET screen is displayed Example 150Set NTP Server Address Set Time to SynchronizePage Manual for Remote Operation by Network Connection Operations possible with PC control Digital video recorder network settingsGetting Prepared 153 Click Custom Level 154Getting Prepared Click the Security tab Click OK 155Click Network Connections Click Properties 156 Network ControlControlling from a PC Select a language and click OK DisconnectingMessages displayed when connected 157 158 „ When control rights are switched to the unitDisplay on the PC „ When disconnected from the network „ When network settings are changed Operation panel 159 Operation Panel Functions and Restrictions 160Camera operation panel Finishing dome camera operation 161 Stopping normal recording Recording Images162 Click the button on the operation panel 163 Watching ImagesVarious ways of displaying live images 164 Performing operations in play modeWatching Images 165 Adjusting the image and audio Screen display items Normal Recording ModeAlarm Recording Mode 166 Downloading live images to a PC 167 „ To cancel a save operation When saving is completed, click OK on the pop-up window168 Search menu Search for video using the search mode screen169 Basic operation 170 Searching for Recorded Video Alarm LOG Search Alarm Thumbnail Search Searching for Recorded Video Alarm Search171 Click 4. TIME/DATE Search on the Search screen 172Searching for Recorded Video TIME/DATE Search Archive Area Search Specify the search area from the Search from pull-down menu 173Searching for Recorded Video Motion Detection Search Click 6. Motion Detection Search on the Search screen Enter the number of images for HOW Many 174Copying to the archive area Click Button on the operation Panel Downloading to a PC 175 Displays the download results 176 Click a menu on the Main Menu Settings177 Making menu selections Menu structure 178 Clock SET 179Summer Time SET/EXT. Clock SET Click 3. Holiday SET 180Holiday SET Click Save Click 1. Recording Area SET 181Recording Area SET Click 2. Record SET Recording Conditions SET 182 183 Record SET Normal REC Mode SET Click 4. Program REC SET 184Program REC SET Set REC Program Group to the desired program group Click 5. Timer SET Record SET Timer SET185 Setting alarm recording Record SET Alarm REC Mode SETClick 6. Alarm REC Mode SET Set Alarm Recording to the desired recording mode 187 Set Alarm Interleave to the desired recording patternSet Duration to the desired alarm recording duration Set PRE-ALARM Recording to on or OFF 15MIN Set Duration to the desired pre- alarm recording durationAlarm or 188 Display SET 189Buzzer SET Click 3. Security Lock SET To cancel the buzzer setting on the PC190 Security Lock SET General SET User ID SET Set user ID for User ID Set Password Set user level for LVSettings Description Level 191 Click 5. RS-232C/RS-485 SET 192RS-232C/RS-485 SET HDD SET Click 7. Network SET Change the settings as required193 Network SET Set Network Status to on or OFF 194Network Control SET Click 8. Network Control SET 195 Sequence SET 196 Set the following functions as required 197Screen SET Mask SET Click 2. Mask SET Click 5. Power LOSS/USED Time Power LOSS/USED Time198 Initialization LOG 199Click 6. Initialization LOG 200 Saving Menu SettingsLoading Menu Settings Click 7. Copy Menu Settings 201 Alarm Notice SETClick 1. Alarm Notice SET Set Alarm Notice to on Click 2. Camera Control SET 202Camera Control SET PPP SET NTP SET 203 Set Time Zone Setting is saved Click Renewal to manually update the time204 Click 4. Time ZONE/NTP SET Operating environment Installing DVR Viewer2DVR VIEWER2 205 Opening DVR Viewer2 206DVR VIEWER2 Opening and closing DVR Viewer2 Click Browse... to display the folder tree 207Opening files Click OpenO on the FileF menu Thumbnail window 208Viewing images Main window Rplay 209TOP Prev Printing images 210 211 Interface SpecificationsRS-485 specifications RS-232C specifications DVR/VCR command table Interface Specifications212 213 SpecificationsJpeg 420 Specifications Dimensions214 Units mm 215 Specifications Table of recording rates and times 216 217 Specifications Table of recording rate settingsRecording rates that cannot be selected English 218 Specifications Table of pre-alarm recording times 219 Specifications Terminal board specifications 220 Recording Area SET →P.77 Menu Setting Sequence221 Record SET →P.71 Network SET →P.120 Menu Setting SequencePower LOSS/USED Time → P.133 222 Dial UP SET →P.148 Alarm Notice SET →P.144223 Initialization LOG →P.134 Index Symbols224 Index 225112, 125 L8HBD/XE, L8HBF/XE 0405TR-SY