Sanyo DSR-5009P Detecting connected cameras, Flashes Default setting is, Example Set to

1INITIAL SET

5 Turn the jog dial to select “ADJUST. TIME” under <EXT. CLOCK SET> and then turn the shuttle dial clockwise.

“01” flashes.

The default setting is “01:00”.

<LANGUAGE/LANGUE/SPRACHE/IDIOMA> ENGLISH

<CLOCK SET>

01-01-2005 SAT 00:00:00

<SUMMER TIME SET>
MODE	:	USE
	WEEK	MONTH	TIME
ON	LST-SUN	03	02:00
OFF	LST-SUN	10	02:00
	<EXT.CLOCK SET>
ADJUST. TIME		01:00

6 Turn the jog dial to select the time and then turn the shuttle dial clockwise.

Example: Set to 05:00.

<LANGUAGE/LANGUE/SPRACHE/IDIOMA> ENGLISH

<CLOCK SET>

01-01-2005 SAT 00:00:00

<SUMMER TIME SET>
MODE	:	USE
	WEEK	MONTH	TIME
ON	LST-SUN	03	02:00
OFF	LST-SUN	10	02:00
	<EXT.CLOCK SET>
ADJUST. TIME		05:00

7 Press the [EXIT/OSD] button.

The setting procedure for the first digital video recorder is ended and the display returns to the normal screen.

EXIT/OSD

8 Use the same procedure to set the time on the second recorder.

zSet the time to the same time of the first digital video recorder.

zWhen using the CLOCK OUT/IN terminals to set the time, use the same power source for each DVR unit. When turning the power off, do so for all devices at the same time. Otherwise, times will be out of sync.

zThe minutes and seconds cannot be set for “ADJUST. TIME”.

Detecting connected cameras

Automatically detect connected cameras and adjust the following settings depending on the presence or absence of cameras.

zProgram record set (JP.85)

All settings for programs No. 1-4 are set to “1FPS” for channels with cameras connected and “OFF” for channels with no cameras connected.

zAutomatic screen selection time period and monitor settings (JP.128)

All settings for time periods T1-4 are set to “1S” for channels with cameras connected and “OFF” for channels with no cameras connected.

zSetting masks (JP.130)

All settings for time period T1 - 4 including main monitor, monitor 2, and network are set to “OFF” for each channel.

1 Press the [MENU] button.

The MENU indicator lights up and the <MAIN MENU> is displayed.

MENU

2 Turn the jog dial to select “1.INITIAL SET” and then turn the shuttle dial clockwise.

The <INITIAL SET> screen is displayed.

3 Turn the jog dial to select “2.CAMERA DETECT” and then turn the shuttle dial clockwise.

The <WARNING> screen is displayed.

<WARNING>

CAMERA DETECT

CONTINUE?

NO

SETTINGS

64 English