144, Setting alarm notification | Sanyo DSR-5009P manual

8ADVANCED MENU SET

Setting alarm notification

Use the following procedure to receive notification by e-mail when an alarm event occurs while the digital video recorder is connected to a network. Alarm notification cannot be set from the digital video recorder.

Set this on a PC connected to the network. (JP.201) The following section describes how to display the alarm notification setting details.

1 Press the [MENU] button.

The MENU indicator lights up and the <MAIN MENU> is displayed.

MENU

2 Turn the jog dial to select “8.ADVANCED MENU SET” and then turn the shuttle dial clockwise.

The <ADVANCED MENU SET> screen is displayed.

3 Turn the jog dial to select “2.ALARM NOTICE SET” and then turn the shuttle dial clockwise.

The <ALARM NOTICE SET> screen is displayed.

(1)		<ALARM NOTICE SET>
(2)	ALARM NOTICE	: OFF

(3)SMTP SERVER ADDRES :

(4)	USER MAIL ADDRES	:
(4)	SEND MAIL ADDRESS SET ->
(5)	SEND MAIL ADDRESS SET ->
(5)	SUBJECT :
(6)	AUTHENTICATION	: NO USE

(7)POP3 SERVER ADDRESS :

	(8)	USER ID	:
		PASSWORD	:
	(9)

(1) ALARM NOTICE

Displays whether or not an alarm notification is sent.

(2)SMTP SERVER ADDRESS Displays the SMTP server address.

(3)USER MAIL ADDRESS

Displays the e-mail address from which the alarm notification is sent.

(4) SEND MAIL ADDRESS SET

Displays the <SEND MAIL ADDRESS SET> screen. (J step 4)

(5) SUBJECT

Displays the e-mail subject.

(6) AUTHENTICATION

Displays whether or not user authentication is performed.

(7)POP3 SERVER ADDRESS Displays the POP3 server address.

(8)USER ID

Displays the user ID.

(9)PASSWORD Displays the password.

4 Turn the shuttle dial clockwise.

The <SEND MAIL ADDRESS SET> screen is displayed.

<SEND MAIL ADDRESS SET>
USE MAIL ADDRESS	IMAGE
1: OFF	OFF
2: OFF	OFF
3: OFF	OFF
4: OFF	OFF
5: OFF	OFF
6: OFF	OFF
7: OFF	OFF
8: OFF	OFF

(1)

(2)

(3)

(1) USE

Displays whether or not an alarm notification is sent to the recipient e-mail address.

(2) MAIL ADDRESS

Displays the e-mail address to which the alarm notification is sent.

(3) IMAGE

Displays whether or not an alarm image is attached to the e- mail.

5 Press the [EXIT/OSD] button.

The normal display is restored.

EXIT/OSD

SETTINGS

144

English

Image 145

Sanyo DSR-5009P instruction manual 144, Setting alarm notification

Contents

About this manual Digital Video Recorder with Multiplexer Function Service PrecautionLocation Avoiding Electrical Shock and Fire Accessories Main featuresSymbols used in this manual Introduction Contents Network Control Contents Settings Network Settings Contents Network Operation Contents Other HDD and cooling fan are consumable components Before USEImportant recordings Protection of the HDD Before USE Backup battery DSR-5016P Names and Functions of PartsFront panel DSR-5009P Names and Functions of Parts Rear panel ALL Reset button Sensor Alarm OUT terminalsAC power socket AC Power cord holder Connecting the RS-232C terminal Installation and ConnectionsBasic connections DSR-5016P RS-232C Pin locations Connecting RS-485 control terminals Installation and Connections RS-485 termination switch settings Connecting to a 2ND RS485/422 terminalConnect as above Operation Connecting an amplifier Connecting a LAN terminalConnecting alarm input terminals LAN connection Connecting control terminals Connecting Sensor Alarm OUT terminalsConnecting the power cord Operation Preparing for USE 01-01-05 000000 REC Repeat EN a AlarmOperation display Changing the display position of the operation display area Preparing for USEChanging the language Press the EXIT/OSD button Example Setting 830 on 26 October Setting the timeTurn the shuttle dial clockwise Hard disk recording areas Hard disk archive areaRecording area Archive area Viewing on a full screen Monitoring Video from a CameraPress the No Camera Select button Press the Zoom button during monitoring of camera video Viewing on quad screens Monitoring Video from a CameraPress the Zoom button to return to normal magnification Press the Quad button Enlarging video Viewing on multi 9 or multi 16 screensPress the Multi button Press the Plus button during multi 9 screen display Setting automatic quad-screen selection Setting automatic full screen selectionAutomatic camera selection Press the Sequence button Press the MON2 button Viewing on monitorViewing on a quad screen Viewing on a full screen Monitor Main monitor Viewing on multi 9 or multi 16 screens MON2 indicator turns off Displaying alarm video in full screen formatMonitor Set timer recording. JP.87 Press the Timer button Timer recordingRecording Normal recording Pre-alarm recording Alarm recordingRecording Playing video on a full screen PlayFast-forward and fast-rewind playback Changing the playback speed Magnifying the playback video PlayPress the Zoom button during playback Frame advance forward/reverse Viewing still imagesPlaying video on multiple screens Video on full, quad, multi 9 or multi To view video from other camerasScreens Press the Multi button during Playback Motion Detection Search JP.45 Searching for Recorded Video Searching for Recorded Video Alarm log search„ To confirm normal recording Total Alarms Alarm searchDATE/TIME Search „ To view pre-alarm video Entering an alarm number to search for an alarm videoSearch screen, press the FUNC. button and select Search Search input field flashes Press the FUNC. button Entering a camera number to search for an alarm videoCursor moves to the list Channel input field flashes Press the Alarm button during playback Alarm thumbnail searchTo view alarm video before or after the current playback Turn the jog dial to select the video for playback Search by entering an alarm numberSearch screen, press the FUNC. button Search by entering a camera number Time/date searchRecording TOP Recording END Press the Camera Select 5 button Turn the shuttle dial clockwise while Channel is selectedSpecify the date and time Date Searching within the archive areaStart Total Motion detection search Entering an archive number to search for an alarm videoCursor moves to Search Motion Detection Search screen is displayed Start Setting the motion sensor for searchingEND Motion Sensor ‹OFF „ If not FOUND! is displayed Turn the jog dial to select PreviewViewing video detected by the motion sensor Set the motion sensor again Copying video to the hard disk’s archive area JP.50 Saving Copying Recorded VideoCopying video to a CompactFlash card or Microdrive JP.51 Copying video to a CD-R/RW or DVD+R/+RW JP.54 Copying video to the hard disk’s archive area Saving Copying Recorded VideoPress the Copy button Set the time Copying to a CompactFlash card or Microdrive „ To cancel copyingInsert a CompactFlash card Example Copying 20 images Maximum Turn the shuttle dial clockwise while Pictures is flashing Available space and write capacity are checked Viewing images copied to a CompactFlash card on a PC Connect a recordable CD or DVD drive and insert a disk Copying to a CD-R/RW or DVD+R/ +RWExample Copying the maximum video to the copy destination Cursor appears on Copy Start Number of images flashes ‹COMPACT Formatting a CompactFlash card, CD-RW orFlash Disc Writer Dcim Viewer YYMMDD99 Viewing images on a PC Basic menu operations Menu Configuration and OperationsTurn the jog dial to select an item Turn the jog dial to select a function Resetting menu items Menu Configuration and OperationsMovement and confirmation in sub-menus and setting screens Displayed settings are restored to their default values Power LOSS/USED Time JP.133 Displays the date and time Sub-menu configurationCopy Menu Settings JP.135 Stores and loads menu Advanced Menu SET JP.138 Sets the ROI setting, alarm Initial SET Configuration Setting the summer time Setting the languageTurn the jog dial to select Mode under Summer Time SET Initial SET Set the date and time External clock settingSummer time begins Summer time ends Detecting connected cameras Flashes Default setting isExample Set to Example Setting the title HALL-1STFL for Camera No Setting camera titlesQuad Example Setting 26 October as a holiday Setting holidaysHoliday SET screen is displayed Default setting is Turn the jog dial to select H Set the day and month for item Setting time periods „ Masking camera video using a gray pattern „ Setting automatic selection of camera video„ Alarm recording using motion sensors Operations during the specified time periods Example 1 Setting periods using Time Period a Timer period settingsSet the time for T-1 Set the time for T-2 Time Period a flashes Timer period operations settingsCursor moves to Time Period a Record SET Setting based on recording days Normal recording easy setupAlarm Operation SET JP.102 Makes settings for Record SET Example Timer recording from 8 AM to 8 PM Set the time for timer recording Turn the shuttle dial counter-clockwise Setting based on recording rateExample on REC Rate Base 25 FPS/CAM Recording Area SET screen is displayed Displaying the recording areasDisplays the total capacity of the hard disk Hard disk capacity Example Setting the recording area to 50% „ Default hard disk settingsChanging recording areas Turn the jog dial to select YES Recordings can now be made to the recording area Setting overwrite permission OFF Setting recording conditions‹ON Auto Alarm 01-01-05 000000 REC 5% EN a Alarm‹MANUAL Copy Copy Setting auto deleting Setting normal recording Default setting OFF „ Setting the picture quality for each cameraFPS flashes Allowable Example P-1 Setting program recordingProgram Select Individual Camera Rate Flashes for Program Program REC SET screen is displayedCursor moves to 01 under Select Individual Camera Rate FPS Recording rate is not set Timer setting items Timer settings Indicating the hour from Start flashes Setting the Start and Stop timeOFF flashes for SET Cursor appears in the bottom line „ To change a setting item Use the same procedure to set other itemsTo cancel all set timer reservations EXT Timer recordings spanning more than 24 hours Make settings in the Week and Start columnsSAT in the Week column flashes Line OFF 5FPS Timer recording using an external timer Cursor moves to line Setting timer recording To set alarm recording Setting alarm recording Only flashes Cursor moves to Alarm Interleave ‹ONLY Cursor moves to PRE-ALARM Recording To set pre-alarm recordingNumber of alarms Alarm display Pre-alarm recording is enabled Pre-alarm recording is disabledFlashes Default setting 12.5FPS Cursor moves to Alarm Trigger Number of alarms Setting alarm triggersUse this setting to indicate how alarms are to be detected PRE display Level Setting the motion sensors 100 Use the same procedure to set other sensor positionsTurn the jog dial to select a or B Turn the shuttle dial clockwise twice Setting sensitivity levels Setting time periodsSetting sensor modes 101 102 Setting alarm operation and display„ To stop motion sensor recording To B 103 104 105 Canceling an alarm General SET RS-232C/RS-485 SET JP.115 Makes settings when106 HDD SET JP.117 107 Setting data displayGeneral SET 108 Setting display for video lossOn flashes for Video Loss 109 Setting the buzzer 110 Setting the security lock ‹NORMAL 111Change LV4 112 Setting user ID„ User level and privileges Registering a user Turning on the key lock, password lock and network lock Enter a password113 Enter a user ID Enter the user ID and password During password lock, press114 Confirm the lock status 115 Setting RS-232C and RS-485RS-232C/RS-485 SET screen is displayed RS-485 flashes 116 117 Setting mirroringHard disk initialization and mirroring Initializing the hard disk ‹MASTER 118 119 Switching playback disksExpanding Replacing and initializing the hard disk Making network settings Network settingsSwitch 120 Set IP Address 121Set Subnet Mask Set Gateway Set Http Port 122 123 Making network control settings 124 125 Setting user„ User levels and privileges LV1 LV2 LV3 LV4 Screen SET Setting quad and multi 9/16 display126 Screen SET 127Checking modified screen positions Screen SET screen is displayed 1281S flashes for Full Automatic selection is set to an interval of 5 seconds MAIN/MON.2 Monitor SET screen is displayed 129Flash for Time Period Cursor moves to 1S for 01 and Main MON ‹ 1S 30S Switching interval seconds Setting masks130 Channel not displayed 131 Use the same procedure to set other channels Settings The default setting is Setting the color level132 Color Level SET screen is displayed 133 Power LOSS/USED TimeSelect Used Time and then turn the shuttle dial clockwise 134 Initialization LOGArea Action Saving menu settings Copy Menu SettingsCopy Menu Settings screen is displayed Jog dial 135 Loading menu settings Copy Menu SettingsCopy Menu Settings screen is displayed 136 Use the following procedure to copy recording area settings Copying the recording area settings137 Cursor appears on Save Menus to CF 138 Advanced Menu SET Setting the ROI Setting ROI139 Advanced Menu SET 140 Response sensitivity is enabled. Lower Response sensitivity is disabledSet Time LAG to OFF when Level is set English 141 142 Setting ROI areasNo operation after the response-stop 1S 10S Set the areas in frame 2 and frame 3 in the same way 143Cursor moves to the bottom right Cursor the orange † moves to the top left of frame 144 Setting alarm notification 145 Camera control settingsSanyo COAX1 Sanyo Coax Sanyo RS485 BBV Coax Pelco Coax Sanyo COAX2 146 147 Making PPP settingsClick the buttons to operate the camera Operating the camera with the digital video recorder 148 149 Time zone/NTP settingTime Zone SET / NTP SET screen is displayed GMT Dublin, Lisbon, London flashes Set NTP Server Address 150Set Time to Synchronize ExamplePage Manual for Remote Operation by Network Connection Getting Prepared Digital video recorder network settings153 Operations possible with PC control Getting Prepared 154Click the Security tab Click Custom Level Click Network Connections 155Click Properties Click OK 156 Network ControlControlling from a PC Messages displayed when connected Disconnecting157 Select a language and click OK Display on the PC „ When disconnected from the network „ When control rights are switched to the unit„ When network settings are changed 158 Operation panel 159 Operation Panel Functions and Restrictions 160Camera operation panel Finishing dome camera operation 161 162 Recording ImagesClick the button on the operation panel Stopping normal recording 163 Watching ImagesVarious ways of displaying live images 164 Performing operations in play modeWatching Images 165 Adjusting the image and audio Alarm Recording Mode Normal Recording Mode166 Screen display items Downloading live images to a PC 167 „ To cancel a save operation When saving is completed, click OK on the pop-up window168 169 Search for video using the search mode screenBasic operation Search menu 170 Searching for Recorded Video Alarm LOG Search Alarm Thumbnail Search Searching for Recorded Video Alarm Search171 Searching for Recorded Video TIME/DATE Search 172Archive Area Search Click 4. TIME/DATE Search on the Search screen Searching for Recorded Video Motion Detection Search 173Click 6. Motion Detection Search on the Search screen Specify the search area from the Search from pull-down menu Copying to the archive area 174Click Button on the operation Panel Enter the number of images for HOW Many Downloading to a PC 175 Displays the download results 176 177 SettingsMaking menu selections Click a menu on the Main Menu Menu structure 178 Clock SET 179Summer Time SET/EXT. Clock SET Holiday SET 180Click Save Click 3. Holiday SET Recording Area SET 181Click 2. Record SET Click 1. Recording Area SET Recording Conditions SET 182 183 Record SET Normal REC Mode SET Program REC SET 184Set REC Program Group to the desired program group Click 4. Program REC SET Click 5. Timer SET Record SET Timer SET185 Click 6. Alarm REC Mode SET Record SET Alarm REC Mode SETSet Alarm Recording to the desired recording mode Setting alarm recording Set Duration to the desired alarm recording duration Set Alarm Interleave to the desired recording patternSet PRE-ALARM Recording to on or OFF 187 Alarm or Set Duration to the desired pre- alarm recording duration188 15MIN Display SET 189Buzzer SET 190 To cancel the buzzer setting on the PCSecurity Lock SET Click 3. Security Lock SET Settings Description Level Set user ID for User ID Set Password Set user level for LV191 General SET User ID SET RS-232C/RS-485 SET 192HDD SET Click 5. RS-232C/RS-485 SET 193 Change the settings as requiredNetwork SET Click 7. Network SET Network Control SET 194Click 8. Network Control SET Set Network Status to on or OFF 195 Sequence SET 196 Screen SET Mask SET 197Click 2. Mask SET Set the following functions as required Click 5. Power LOSS/USED Time Power LOSS/USED Time198 Initialization LOG 199Click 6. Initialization LOG Loading Menu Settings Saving Menu SettingsClick 7. Copy Menu Settings 200 Click 1. Alarm Notice SET Alarm Notice SETSet Alarm Notice to on 201 Camera Control SET 202PPP SET Click 2. Camera Control SET NTP SET 203 204 Setting is saved Click Renewal to manually update the timeClick 4. Time ZONE/NTP SET Set Time Zone DVR VIEWER2 Installing DVR Viewer2205 Operating environment DVR VIEWER2 206Opening and closing DVR Viewer2 Opening DVR Viewer2 Opening files 207Click OpenO on the FileF menu Click Browse... to display the folder tree Viewing images 208Main window Thumbnail window TOP 209Prev Rplay Printing images 210 RS-485 specifications Interface SpecificationsRS-232C specifications 211 DVR/VCR command table Interface Specifications212 213 SpecificationsJpeg 214 Specifications DimensionsUnits mm 420 215 Specifications Table of recording rates and times 216 217 Specifications Table of recording rate settingsRecording rates that cannot be selected English 218 Specifications Table of pre-alarm recording times 219 Specifications Terminal board specifications 220 221 Menu Setting SequenceRecord SET →P.71 Recording Area SET →P.77 Power LOSS/USED Time → P.133 Menu Setting Sequence222 Network SET →P.120 223 Alarm Notice SET →P.144Initialization LOG →P.134 Dial UP SET →P.148 Index Symbols224 Index 225112, 125 L8HBD/XE, L8HBF/XE 0405TR-SY