Sanyo DSR-5009P instruction manual 202, Ppp Set, Click 2. Camera Control SET, Click 3. PPP SET

9ADVANCED MENU SET

zThe digital video recorder supports the following SMTP authentication:

• CRAM-MD5 • LOGIN

zFor the digital video recorder to perform authentication, the provider must have authentication settings made. Make the authentication settings after confirming the type of authentication supported by the connected provider.

2. CAMERA CONTROL SET

Set when cameras with remote operation capability are connected.

Perform the following connections and set camera control to use in full screen display.

Connections necessary for remote operation:

zConnect coaxial control cameras to the VIDEO terminal.

zConnect the Sanyo RS-485 control camera to the RS-485 terminal (RJ-11).

zConnect the other companies’ RS485/422 control camera to the 2ND RS485/422 terminal.

1 Click the button on the operation panel.

The “MAIN MENU” is displayed.

2 Click “8. ADVANCED MENU SET”.

The “ADVANCED MENU SET” screen is displayed.

3 Click “2. CAMERA CONTROL SET”.

The “CAMERA CONTROL SET” screen is displayed. The DSR-5009P displays only nine channels.

4 Set “PROTOCOL” to the protocol corresponding to the dome camera.

[Settings] (‹ indicates default setting)

Setting	Description
‹OFF	No protocol
SANYO COAX1	SANYO COAX
SANYO RS485	SANYO RS485
BBV COAX	BBV COAX
PELCO COAX	PELCO COAX
2ND RS-485/422	2ND RS-485/422
SANYO COAX2	SANYO COAX (High speed)

5 The address (000 to 127) is displayed in “ADD”.

6 Use the same procedure to set the other channels.

7 Set “2ND RS-485/422 PROTOCOL”.

8 Click [SAVE].

The setting is saved.

3. PPP SET

This setting is required to connect to the provider.

1 Click the button on the operation panel.

The “MAIN MENU” is displayed.

5

4

CAMERA CONTROL SET

2 Click “8. ADVANCED MENU SET”.

The “ADVANCED MENU SET” screen is displayed.

CH	PROTOCOL	ADD.
1	OFF	----
2	OFF	----
3	OFF	----

CH	PROTOCOL	ADD.
9	OFF	----
10	OFF	----
11	OFF	----

3 Click “3. PPP SET”.

The “PPP SET” screen is displayed.

4	OFF	----
5
	OFF	----
6		----
	OFF
7		----
	OFF
8		----
	OFF

12	OFF	----
13
	OFF	----
14		----
	OFF
15		----
	OFF
16		----
	OFF

4

6

PPP SET

5	DIAL UP		:	OFF
		PROVIDER TEL. NO.	:
7		LOGIN ID	:
		PASSWORD	:

72ND RS-485/422 PROTOCOL : OFF

8 SAVE

8

9

11

13

		AUTHENTICATION	:	AUTO
		AUTO IP ADDRESS	: 0. 0. 0. 0
	DIAL IN		:
10				OFF
		LOGIN ID	:
		PASSWORD	:
12
		AUTHENTICATION	:	AUTO
		IP ADDRESS	:
14				192	.	168
		CLIENT IP ADDRESS	:
				192	.	168

. 250

. 250

. 250

. 251

NETWORK SETTINGS

15	CIRCUIT TYPE		: TONE
16	MODEM INITI. COMMAND :
17	BAUD RATE : 115200		bps,	DATA SIZE : 8 bits
18	PARITY	: NONE	,	STOP BIT : 1
19
20			SAVE

202 English