Sanyo DSR-5009P instruction manual Recording Images, 162, Click the button on the operation panel

1RECORDING IMAGES

Use the following procedures to store monitored images and alarm images on the internal hard disk of the digital video recorder.

Before recording images, make the necessary menu settings to match the installation environment. (JP.178)

RECORD

Normal recording

Use the following procedure to manually record live monitored images.

1 Click the button on the operation panel.

Normal recording starts.

Stopping normal recording

2 Click the button on the operation panel.

Timer recording

Use the following procedure to automatically record monitored images in accordance with timer settings. Note that timer recording cannot operate during normal recording.

1 Set the conditions for timer recording using the “TIMER SET” screen. (JP.185)

2 Click the button on the operation panel.

The unit enters standby mode for timer recording, and recording then starts and stops automatically at the set times. The current status of timer recording is displayed on-screen with the message “TIMER STANDBY” or “TIMER RECORDING”.

zIf “OLY AL-RC ON TMR” has been selected using the “ALARM REC MODE SET” menu item (JP.186), it is not

necessary to click the button on the operation panel to set up standby mode.

3 To cancel timer recording, click the button on the operation panel while “TIMER STANDBY” is displayed.

Alarm recording

When an alarm is detected via the ALARM IN terminal or a motion sensor, the recording of alarm images starts automatically.

Use the alarm recording settings (JP.186) to activate alarm recording, or set the alarm recording not to be performed during timer recording.

1 Set the conditions for “ALARM RECORDING” using the “ALARM REC MODE SET” screen. (JP.186)

zRegardless of the unit’s current operation or status, alarm recording starts automatically whenever an alarm is detected.

zWhen the duration set for alarm recording ends, alarm recording stops automatically.

zSettings can be made to generate a buzzer sound on the PC when an alarm occurs on the digital video recorder. (JP.187)

zClick the button on the PLAYBACK area on the operation panel to stop the alarm during alarm recording.

Pre-alarm recording

Use the following procedure to set pre-alarm recording to record video just before an alarm. Images can be viewed from just before an alarm when alarm recording is played back.

1 Set the conditions for “PRE-ALARM RECORDING” using the “ALARM REC MODE SET” screen. (JP.187)

zThe newest images for the preset duration are automatically recorded and updated by overwriting.

zPre-alarm recording is automatically terminated whenever alarm recording starts, and it is automatically restarted as alarm recording ends.

NETWORK OPERATION

162 English