Sanyo DSR-5009P Preparing for USE, Operation display, 01-01-05 000000 REC Repeat EN a Alarm

1PREPARING FOR USE

Operation display

When the power is turned on, the operation display is shown at the top of the monitor screen. This area indicates the date, time, picture quality and other information needed for operation.

Operation
	01-01-05 00:00:00 REC REPEAT EN A ALARM 0000000
display area

					02
(1)	(2)	(3)	(4)	(5)(6)	(7)

01-01-05 00:00:00 REC REPEAT EN A ALARM 0000000

02

(8)

* The above is an example display. This is not the default.

(1) Date display (JP.20)

Be sure to specify the correct date using menu settings.

(2) Time display (JP.20)

Make sure to specify the time using menu settings. Recording is not possible until the time is set.

(3) Operation symbol display

Displays the current operation, such as recording or playback.

REC: Recording		: Fast-forward playback
EXT: External timer recording		: Fast-rewind playback
	: Normal playback	: Slow playback
	: Reverse playback	: Reverse slow playback
	: Still

zThe digital video recorder uses the date and time to manage recording and playback points. Accordingly, if the time has not been set correctly, it is not possible to effectively search for video data.

zDuring simultaneous recording and playback, the display indicates playback ( ).

(4)Remaining memory in recording area (JP.80) It is displayed while recording.

Displays the remaining area memory as a percentage when overwriting in the recording area is not permitted. If overwriting is permitted, “REPEAT” is displayed.

(5) Picture quality display (JP.83, P.94)

Displays the quality of the video that can be recorded on the hard disk. Set to “EN” (Enhanced) by default setting.

[Settings] (‹ indicates default setting)

BA	Basic
NO	Normal
‹EN	Enhanced
FI	Fine
SF	Super Fine

(6) Audio recording display

“A” is displayed when audio is being recorded. “A” is displayed when audio is being played back if audio is recorded. When the [AUDIO] button is pressed, the audio channel (OFF/A1/ A2/A12) is displayed.

(7)Alarm display and alarm count display (JP.93) When an alarm is set using the “ALARM REC MODE SET” menu item, the following information is displayed.

z When alarm recording is set;

“ALARM” and the alarm number are displayed in stand-by mode.

“ALARM” flashes during alarm recording. z When pre-alarm recording is in progress;

“PRE” and the alarm number are displayed in stand-by mode.

When an alarm occurs, “PRE” disappears and “ALARM” and the alarm number are displayed.

z When performing playback from the archive area; “ARCHIV” and the backup number are displayed.

(8)Camera title display

The camera number or camera title is displayed. Also, when an alarm occurs the camera number and alarm “EA”, “SA”, or “ES” are displayed.

zWhen an external alarm signal is activated; “EA” flashes to the left of the camera number.

zWhen a motion sensor alarm signal is activated; “SA” flashes to the left of the camera number.

zWhen an external alarm signal and motion sensor signal are activated;

“ES” flashes to the left of the camera number.

zAlthough operations such as playback, copying and data transfer are possible while recording, this unit gives priority to recording, and other operations may be delayed as a result.

OPERATION

18 English