109, Setting the buzzer | Sanyo DSR-5009P manual

3GENERAL SET

Setting the buzzer

Use the following procedure to set a warning buzzer to sound for alarms or when hard disk space becomes insufficient.

1 Press the [MENU] button.

The MENU indicator lights up and the <MAIN MENU> is displayed.

MENU

2 Turn the jog dial to select “3.GENERAL

SET” and then turn the shuttle dial clockwise.

The <GENERAL SET> screen is displayed.

3 Turn the jog dial to select “2.BUZZER SET” and then turn the shuttle dial clockwise.

The <BUZZER SET> screen is displayed.

(1)

			<BUZZER SET>
(2)			ALARM	: OFF
			DISK FULL	: ON
			DISK FULL	: ON
(3)			DISK ERROR	: ON
(3)			LOCK WARNING	: ON
(4)			KEY IN	: OFF
(4)			NON REC	: OFF

(5)

(6)

(1)ALARM (default setting: OFF) Sounds a buzzer when an alarm occurs.

(2)DISK FULL (default setting: ON)

Sounds a buzzer when overwriting is not permitted and the hard disk capacity becomes insufficient.

(3)DISK ERROR (default setting: ON) Sounds a buzzer when a hard-disk error occurs.

(4)LOCK WARNING (default setting: ON)

Sounds a buzzer if a button is pressed while the security lock is on. Specifically, the buzzer sounds twice with an interval of approximately 0.5 seconds.

(5)KEY IN (default setting: OFF) Sounds a buzzer when a button is pressed.

(6)NON REC (default setting: OFF) Sounds a buzzer when recording is stopped.

4 Turn the shuttle dial clockwise.

“OFF” flashes for “ALARM”.

<BUZZER SET>

ALARM	: OFF
DISK FULL	: ON
DISK ERROR	: ON
LOCK WARNING	: ON
KEY IN	: OFF
NON REC	: OFF

5 Turn the jog dial to select “ON” or “OFF” and then turn the shuttle dial clockwise.

The cursor moves to “DISK FULL”.

<BUZZER SET>

ALARM	: ON
DISK FULL	: ON
DISK ERROR	: ON
LOCK WARNING	: ON
KEY IN	: OFF
NON REC	: OFF

[Settings] ( indicates default setting)

	Setting	Description
	OFF	The buzzer does not sound when an alarm
	OFF	occurs.
		occurs.

	ON	The buzzer sounds when an alarm occurs.

6 Use the same procedure to set the other items to “ON” or “OFF”.

7 Press the [EXIT/OSD] button.

The setting is completed and the display returns to the normal screen.

EXIT/OSD

zTo stop a buzzer, press any button or turn either the jog dial or shuttle dial.

English

109

Image 110

Sanyo DSR-5009P instruction manual 109, Setting the buzzer

Contents

Digital Video Recorder with Multiplexer Function About this manual Location PrecautionService Avoiding Electrical Shock and Fire Symbols used in this manual Main featuresAccessories Introduction Contents Contents Settings Network Control Contents Network Operation Network Settings Contents Other Important recordings Before USEHDD and cooling fan are consumable components Protection of the HDD Backup battery Before USE Front panel Names and Functions of PartsDSR-5016P Names and Functions of Parts DSR-5009P Rear panel AC power socket AC Sensor Alarm OUT terminalsALL Reset button Power cord holder Basic connections DSR-5016P Installation and ConnectionsConnecting the RS-232C terminal RS-232C Pin locations Installation and Connections Connecting RS-485 control terminals Connect as above Connecting to a 2ND RS485/422 terminalRS-485 termination switch settings Operation Connecting alarm input terminals Connecting a LAN terminalConnecting an amplifier LAN connection Connecting the power cord Connecting Sensor Alarm OUT terminalsConnecting control terminals Operation Operation display 01-01-05 000000 REC Repeat EN a AlarmPreparing for USE Changing the language Preparing for USEChanging the display position of the operation display area Press the EXIT/OSD button Turn the shuttle dial clockwise Setting the timeExample Setting 830 on 26 October Recording area Hard disk archive areaHard disk recording areas Archive area Press the No Camera Select button Monitoring Video from a CameraViewing on a full screen Press the Zoom button during monitoring of camera video Press the Zoom button to return to normal magnification Monitoring Video from a CameraViewing on quad screens Press the Quad button Press the Multi button Viewing on multi 9 or multi 16 screensEnlarging video Press the Plus button during multi 9 screen display Automatic camera selection Setting automatic full screen selectionSetting automatic quad-screen selection Press the Sequence button Viewing on a quad screen Viewing on monitorPress the MON2 button Viewing on a full screen Viewing on multi 9 or multi 16 screens Monitor Main monitor Monitor Displaying alarm video in full screen formatMON2 indicator turns off Recording Timer recordingSet timer recording. JP.87 Press the Timer button Normal recording Recording Alarm recordingPre-alarm recording Fast-forward and fast-rewind playback PlayPlaying video on a full screen Changing the playback speed Press the Zoom button during playback PlayMagnifying the playback video Playing video on multiple screens Viewing still imagesFrame advance forward/reverse Screens To view video from other camerasVideo on full, quad, multi 9 or multi Press the Multi button during Playback Searching for Recorded Video Motion Detection Search JP.45 „ To confirm normal recording Alarm log searchSearching for Recorded Video DATE/TIME Alarm searchTotal Alarms Search Search screen, press the FUNC. button and select Search Entering an alarm number to search for an alarm video„ To view pre-alarm video Search input field flashes Cursor moves to the list Entering a camera number to search for an alarm videoPress the FUNC. button Channel input field flashes To view alarm video before or after the current playback Alarm thumbnail searchPress the Alarm button during playback Search screen, press the FUNC. button Search by entering an alarm numberTurn the jog dial to select the video for playback Recording TOP Time/date searchSearch by entering a camera number Recording END Specify the date and time Turn the shuttle dial clockwise while Channel is selectedPress the Camera Select 5 button Start Searching within the archive areaDate Total Cursor moves to Search Entering an archive number to search for an alarm videoMotion detection search Motion Detection Search screen is displayed END Setting the motion sensor for searchingStart Motion Sensor ‹OFF Viewing video detected by the motion sensor Turn the jog dial to select Preview„ If not FOUND! is displayed Set the motion sensor again Copying video to a CompactFlash card or Microdrive JP.51 Saving Copying Recorded VideoCopying video to the hard disk’s archive area JP.50 Copying video to a CD-R/RW or DVD+R/+RW JP.54 Press the Copy button Saving Copying Recorded VideoCopying video to the hard disk’s archive area Set the time Insert a CompactFlash card „ To cancel copyingCopying to a CompactFlash card or Microdrive Example Copying 20 images Turn the shuttle dial clockwise while Pictures is flashing Maximum Viewing images copied to a CompactFlash card on a PC Available space and write capacity are checked Example Copying the maximum video to the copy destination Copying to a CD-R/RW or DVD+R/ +RWConnect a recordable CD or DVD drive and insert a disk Number of images flashes Cursor appears on Copy Start Flash Disc Writer Formatting a CompactFlash card, CD-RW or‹COMPACT Viewing images on a PC Dcim Viewer YYMMDD99 Turn the jog dial to select an item Menu Configuration and OperationsBasic menu operations Turn the jog dial to select a function Movement and confirmation in sub-menus and setting screens Menu Configuration and OperationsResetting menu items Displayed settings are restored to their default values Copy Menu Settings JP.135 Stores and loads menu Sub-menu configurationPower LOSS/USED Time JP.133 Displays the date and time Advanced Menu SET JP.138 Sets the ROI setting, alarm Configuration Initial SET Turn the jog dial to select Mode under Summer Time SET Setting the languageSetting the summer time Initial SET Summer time begins External clock settingSet the date and time Summer time ends Example Set to Flashes Default setting isDetecting connected cameras Quad Setting camera titlesExample Setting the title HALL-1STFL for Camera No Holiday SET screen is displayed Default setting is Setting holidaysExample Setting 26 October as a holiday Turn the jog dial to select H Setting time periods Set the day and month for item „ Alarm recording using motion sensors „ Setting automatic selection of camera video„ Masking camera video using a gray pattern Operations during the specified time periods Set the time for T-1 Timer period settingsExample 1 Setting periods using Time Period a Set the time for T-2 Cursor moves to Time Period a Timer period operations settingsTime Period a flashes Record SET Alarm Operation SET JP.102 Makes settings for Normal recording easy setupSetting based on recording days Record SET Set the time for timer recording Example Timer recording from 8 AM to 8 PM Example on Setting based on recording rateTurn the shuttle dial counter-clockwise REC Rate Base 25 FPS/CAM Displays the total capacity of the hard disk Displaying the recording areasRecording Area SET screen is displayed Hard disk capacity Changing recording areas „ Default hard disk settingsExample Setting the recording area to 50% Turn the jog dial to select YES Setting overwrite permission Recordings can now be made to the recording area ‹ON Setting recording conditionsOFF ‹MANUAL Copy 01-01-05 000000 REC 5% EN a AlarmAuto Alarm Copy Setting auto deleting Setting normal recording FPS flashes „ Setting the picture quality for each cameraDefault setting OFF Allowable Program Setting program recordingExample P-1 Select Individual Camera Rate Cursor moves to 01 under Select Individual Camera Rate FPS Program REC SET screen is displayedFlashes for Program Recording rate is not set Timer settings Timer setting items OFF flashes for SET Setting the Start and Stop timeIndicating the hour from Start flashes Cursor appears in the bottom line To cancel all set timer reservations Use the same procedure to set other items„ To change a setting item EXT SAT in the Week column flashes Make settings in the Week and Start columnsTimer recordings spanning more than 24 hours Line Timer recording using an external timer OFF 5FPS Setting timer recording Cursor moves to line Setting alarm recording To set alarm recording Cursor moves to Alarm Interleave Only flashes ‹ONLY Number of alarms Alarm display To set pre-alarm recordingCursor moves to PRE-ALARM Recording Flashes Default setting 12.5FPS Pre-alarm recording is disabledPre-alarm recording is enabled Cursor moves to Alarm Trigger Use this setting to indicate how alarms are to be detected Setting alarm triggersNumber of alarms PRE display Setting the motion sensors Level Turn the jog dial to select a or B Use the same procedure to set other sensor positions100 Turn the shuttle dial clockwise twice Setting sensor modes Setting time periodsSetting sensitivity levels 101 „ To stop motion sensor recording Setting alarm operation and display102 To B 103 104 Canceling an alarm 105 106 RS-232C/RS-485 SET JP.115 Makes settings whenGeneral SET HDD SET JP.117 General SET Setting data display107 On flashes for Video Loss Setting display for video loss108 Setting the buzzer 109 Setting the security lock 110 Change 111‹NORMAL LV4 „ User level and privileges Setting user ID112 Registering a user 113 Enter a passwordTurning on the key lock, password lock and network lock Enter a user ID 114 During password lock, pressEnter the user ID and password Confirm the lock status RS-232C/RS-485 SET screen is displayed Setting RS-232C and RS-485115 RS-485 flashes 116 Hard disk initialization and mirroring Setting mirroring117 Initializing the hard disk 118 ‹MASTER Expanding Replacing and initializing the hard disk Switching playback disks119 Switch Network settingsMaking network settings 120 Set Subnet Mask 121Set IP Address Set Gateway 122 Set Http Port Making network control settings 123 124 „ User levels and privileges Setting user125 LV1 LV2 LV3 LV4 126 Setting quad and multi 9/16 displayScreen SET Checking modified screen positions 127Screen SET 1S flashes for Full 128Screen SET screen is displayed Automatic selection is set to an interval of 5 seconds Flash for Time Period 129MAIN/MON.2 Monitor SET screen is displayed Cursor moves to 1S for 01 and Main MON 130 Setting masks‹ 1S 30S Switching interval seconds Channel not displayed Use the same procedure to set other channels 131 132 Setting the color levelSettings The default setting is Color Level SET screen is displayed Select Used Time and then turn the shuttle dial clockwise Power LOSS/USED Time133 Area Initialization LOG134 Action Copy Menu Settings screen is displayed Jog dial Copy Menu SettingsSaving menu settings 135 Copy Menu Settings screen is displayed Copy Menu SettingsLoading menu settings 136 137 Copying the recording area settingsUse the following procedure to copy recording area settings Cursor appears on Save Menus to CF Advanced Menu SET 138 139 Setting ROISetting the ROI Advanced Menu SET 140 Set Time LAG to OFF when Level is set English Response sensitivity is disabledResponse sensitivity is enabled. Lower 141 No operation after the response-stop Setting ROI areas142 1S 10S Cursor moves to the bottom right 143Set the areas in frame 2 and frame 3 in the same way Cursor the orange † moves to the top left of frame Setting alarm notification 144 Sanyo COAX1 Sanyo Coax Sanyo RS485 BBV Coax Pelco Coax Camera control settings145 Sanyo COAX2 146 Click the buttons to operate the camera Making PPP settings147 Operating the camera with the digital video recorder 148 Time Zone SET / NTP SET screen is displayed Time zone/NTP setting149 GMT Dublin, Lisbon, London flashes Set Time to Synchronize 150Set NTP Server Address ExamplePage Manual for Remote Operation by Network Connection 153 Digital video recorder network settingsGetting Prepared Operations possible with PC control Click the Security tab 154Getting Prepared Click Custom Level Click Properties 155Click Network Connections Click OK Controlling from a PC Network Control156 157 DisconnectingMessages displayed when connected Select a language and click OK „ When network settings are changed „ When control rights are switched to the unitDisplay on the PC „ When disconnected from the network 158 159 Operation panel Camera operation panel 160Operation Panel Functions and Restrictions 161 Finishing dome camera operation Click the button on the operation panel Recording Images162 Stopping normal recording Various ways of displaying live images Watching Images163 Watching Images Performing operations in play mode164 Adjusting the image and audio 165 166 Normal Recording ModeAlarm Recording Mode Screen display items 167 Downloading live images to a PC 168 When saving is completed, click OK on the pop-up window„ To cancel a save operation Basic operation Search for video using the search mode screen169 Search menu Searching for Recorded Video Alarm LOG Search 170 171 Searching for Recorded Video Alarm SearchAlarm Thumbnail Search Archive Area Search 172Searching for Recorded Video TIME/DATE Search Click 4. TIME/DATE Search on the Search screen Click 6. Motion Detection Search on the Search screen 173Searching for Recorded Video Motion Detection Search Specify the search area from the Search from pull-down menu Click Button on the operation Panel 174Copying to the archive area Enter the number of images for HOW Many 175 Downloading to a PC 176 Displays the download results Making menu selections Settings177 Click a menu on the Main Menu 178 Menu structure Summer Time SET/EXT. Clock SET 179Clock SET Click Save 180Holiday SET Click 3. Holiday SET Click 2. Record SET 181Recording Area SET Click 1. Recording Area SET 182 Recording Conditions SET Record SET Normal REC Mode SET 183 Set REC Program Group to the desired program group 184Program REC SET Click 4. Program REC SET 185 Record SET Timer SETClick 5. Timer SET Set Alarm Recording to the desired recording mode Record SET Alarm REC Mode SETClick 6. Alarm REC Mode SET Setting alarm recording Set PRE-ALARM Recording to on or OFF Set Alarm Interleave to the desired recording patternSet Duration to the desired alarm recording duration 187 188 Set Duration to the desired pre- alarm recording durationAlarm or 15MIN Buzzer SET 189Display SET Security Lock SET To cancel the buzzer setting on the PC190 Click 3. Security Lock SET 191 Set user ID for User ID Set Password Set user level for LVSettings Description Level General SET User ID SET HDD SET 192RS-232C/RS-485 SET Click 5. RS-232C/RS-485 SET Network SET Change the settings as required193 Click 7. Network SET Click 8. Network Control SET 194Network Control SET Set Network Status to on or OFF 195 196 Sequence SET Click 2. Mask SET 197Screen SET Mask SET Set the following functions as required 198 Power LOSS/USED TimeClick 5. Power LOSS/USED Time Click 6. Initialization LOG 199Initialization LOG Click 7. Copy Menu Settings Saving Menu SettingsLoading Menu Settings 200 Set Alarm Notice to on Alarm Notice SETClick 1. Alarm Notice SET 201 PPP SET 202Camera Control SET Click 2. Camera Control SET 203 NTP SET Click 4. Time ZONE/NTP SET Setting is saved Click Renewal to manually update the time204 Set Time Zone 205 Installing DVR Viewer2DVR VIEWER2 Operating environment Opening and closing DVR Viewer2 206DVR VIEWER2 Opening DVR Viewer2 Click OpenO on the FileF menu 207Opening files Click Browse... to display the folder tree Main window 208Viewing images Thumbnail window Prev 209TOP Rplay 210 Printing images RS-232C specifications Interface SpecificationsRS-485 specifications 211 212 Interface SpecificationsDVR/VCR command table Jpeg Specifications213 Units mm Specifications Dimensions214 420 Specifications Table of recording rates and times 215 216 Recording rates that cannot be selected English Specifications Table of recording rate settings217 Specifications Table of pre-alarm recording times 218 Specifications Terminal board specifications 219 220 Record SET →P.71 Menu Setting Sequence221 Recording Area SET →P.77 222 Menu Setting SequencePower LOSS/USED Time → P.133 Network SET →P.120 Initialization LOG →P.134 Alarm Notice SET →P.144223 Dial UP SET →P.148 224 SymbolsIndex 112, 125 225Index L8HBD/XE, L8HBF/XE 0405TR-SY