25 FPS/CAM | Sanyo DSR-5009P specification

2RECORD SET

9 Set the time for timer recording.

Example: Timer recording from 8 AM to 8 PM

(1)Turn the shuttle dial clockwise and then turn the jog dial to select “08” (hour).

(2)Turn the shuttle dial clockwise and then turn the jog dial to select “00” (minutes).

(3)Turn the shuttle dial clockwise and then turn the jog dial to select “20” (hour).

(4)Turn the shuttle dial clockwise, turn the jog dial to select “00” (minutes) and then turn the shuttle dial clockwise again.

The cursor moves to “PICTURE QUALITY”.

<REC RATE BASE>
REC RATE	:	25 FPS/CAM
TIMER RECORDING (DLY) : ON
START 08:00	STOP		20:00
PICTURE QUALITY	: ENHANCED
AUDIO RECORDING	: OFF
NUMBER OF CAMERAS	: 1
RECORDING DURATION	:		23 DAYS

10 Turn the shuttle dial clockwise.

“ENHANCED” flashes.

<REC RATE BASE>
REC RATE	:	25 FPS/CAM
TIMER RECORDING (DLY) : ON
START 08:00	STOP		20:00
PICTURE QUALITY	: ENHANCED
AUDIO RECORDING	: OFF
NUMBER OF CAMERAS	: 1
RECORDING DURATION	:		23 DAYS

11 Turn the jog dial to select the “PICTURE QUALITY” setting and then turn the shuttle dial clockwise. (JP.73)

The cursor moves to “AUDIO RECORDING”.

<REC RATE BASE>
REC RATE	:	25 FPS/CAM
TIMER RECORDING (DLY) : ON
START 08:00	STOP		20:00
PICTURE QUALITY	: ENHANCED

AUDIO RECORDING	: OFF
NUMBER OF CAMERAS	: 1
RECORDING DURATION	:		23 DAYS

12 Turn the shuttle dial clockwise.

“OFF” flashes.

<REC RATE BASE>
REC RATE	:	25 FPS/CAM
TIMER RECORDING (DLY) : ON
START 08:00	STOP		20:00
PICTURE QUALITY	: ENHANCED
AUDIO RECORDING	: OFF
NUMBER OF CAMERAS	: 1
RECORDING DURATION	:		23 DAYS

13 Turn the jog dial to select “ON” or “OFF” and then turn the shuttle dial clockwise. (JP.74)

<REC RATE BASE>
REC RATE	:	25 FPS/CAM
TIMER RECORDING (DLY) : ON
START 00:00	STOP		20:00
PICTURE QUALITY	: ENHANCED
AUDIO RECORDING	: OFF
NUMBER OF CAMERAS	: 1
RECORDING DURATION	:		23 DAYS

14 Turn the shuttle dial counter-clockwise.

The <WARNING> screen is displayed.

<WARNING>

REC RATE SETTING IN THE MENU WILL BE

AUTOMATICALLY ADJUSTED.

ARE YOUSURE ?

NO

CHANGE:JOG SET:SHUTTLE

15 Turn the jog dial to select “YES” and then turn the shuttle dial clockwise.

The display returns to the <NORMAL REC EASY SET> screen.

<NORMAL REC	EASY	SET>

RECORDING DURATION	BASE	->
REC RATE BASE		->

CAUTION !

CONNECT CAMERA AND SET TIME

BEFORE SETUP

SETTINGS

76

English

Image 77

Sanyo DSR-5009P instruction manual 25 FPS/CAM

Contents

About this manual Digital Video Recorder with Multiplexer Function Service PrecautionLocation Avoiding Electrical Shock and Fire Accessories Main featuresSymbols used in this manual Introduction Contents Network Control Contents Settings Network Settings Contents Network Operation Contents Other HDD and cooling fan are consumable components Before USEImportant recordings Protection of the HDD Before USE Backup battery Front panel Names and Functions of PartsDSR-5016P DSR-5009P Names and Functions of Parts Rear panel ALL Reset button Sensor Alarm OUT terminalsAC power socket AC Power cord holder Connecting the RS-232C terminal Installation and ConnectionsBasic connections DSR-5016P RS-232C Pin locations Connecting RS-485 control terminals Installation and Connections RS-485 termination switch settings Connecting to a 2ND RS485/422 terminalConnect as above Operation Connecting an amplifier Connecting a LAN terminalConnecting alarm input terminals LAN connection Connecting control terminals Connecting Sensor Alarm OUT terminalsConnecting the power cord Operation Operation display 01-01-05 000000 REC Repeat EN a AlarmPreparing for USE Changing the display position of the operation display area Preparing for USEChanging the language Press the EXIT/OSD button Turn the shuttle dial clockwise Setting the timeExample Setting 830 on 26 October Hard disk recording areas Hard disk archive areaRecording area Archive area Viewing on a full screen Monitoring Video from a CameraPress the No Camera Select button Press the Zoom button during monitoring of camera video Viewing on quad screens Monitoring Video from a CameraPress the Zoom button to return to normal magnification Press the Quad button Enlarging video Viewing on multi 9 or multi 16 screensPress the Multi button Press the Plus button during multi 9 screen display Setting automatic quad-screen selection Setting automatic full screen selectionAutomatic camera selection Press the Sequence button Press the MON2 button Viewing on monitorViewing on a quad screen Viewing on a full screen Monitor Main monitor Viewing on multi 9 or multi 16 screens Monitor Displaying alarm video in full screen formatMON2 indicator turns off Set timer recording. JP.87 Press the Timer button Timer recordingRecording Normal recording Recording Alarm recordingPre-alarm recording Playing video on a full screen PlayFast-forward and fast-rewind playback Changing the playback speed Press the Zoom button during playback PlayMagnifying the playback video Playing video on multiple screens Viewing still imagesFrame advance forward/reverse Video on full, quad, multi 9 or multi To view video from other camerasScreens Press the Multi button during Playback Motion Detection Search JP.45 Searching for Recorded Video „ To confirm normal recording Alarm log searchSearching for Recorded Video Total Alarms Alarm searchDATE/TIME Search „ To view pre-alarm video Entering an alarm number to search for an alarm videoSearch screen, press the FUNC. button and select Search Search input field flashes Press the FUNC. button Entering a camera number to search for an alarm videoCursor moves to the list Channel input field flashes To view alarm video before or after the current playback Alarm thumbnail searchPress the Alarm button during playback Search screen, press the FUNC. button Search by entering an alarm numberTurn the jog dial to select the video for playback Search by entering a camera number Time/date searchRecording TOP Recording END Specify the date and time Turn the shuttle dial clockwise while Channel is selectedPress the Camera Select 5 button Date Searching within the archive areaStart Total Motion detection search Entering an archive number to search for an alarm videoCursor moves to Search Motion Detection Search screen is displayed Start Setting the motion sensor for searchingEND Motion Sensor ‹OFF „ If not FOUND! is displayed Turn the jog dial to select PreviewViewing video detected by the motion sensor Set the motion sensor again Copying video to the hard disk’s archive area JP.50 Saving Copying Recorded VideoCopying video to a CompactFlash card or Microdrive JP.51 Copying video to a CD-R/RW or DVD+R/+RW JP.54 Copying video to the hard disk’s archive area Saving Copying Recorded VideoPress the Copy button Set the time Copying to a CompactFlash card or Microdrive „ To cancel copyingInsert a CompactFlash card Example Copying 20 images Maximum Turn the shuttle dial clockwise while Pictures is flashing Available space and write capacity are checked Viewing images copied to a CompactFlash card on a PC Example Copying the maximum video to the copy destination Copying to a CD-R/RW or DVD+R/ +RWConnect a recordable CD or DVD drive and insert a disk Cursor appears on Copy Start Number of images flashes Flash Disc Writer Formatting a CompactFlash card, CD-RW or‹COMPACT Dcim Viewer YYMMDD99 Viewing images on a PC Basic menu operations Menu Configuration and OperationsTurn the jog dial to select an item Turn the jog dial to select a function Resetting menu items Menu Configuration and OperationsMovement and confirmation in sub-menus and setting screens Displayed settings are restored to their default values Power LOSS/USED Time JP.133 Displays the date and time Sub-menu configurationCopy Menu Settings JP.135 Stores and loads menu Advanced Menu SET JP.138 Sets the ROI setting, alarm Initial SET Configuration Setting the summer time Setting the languageTurn the jog dial to select Mode under Summer Time SET Initial SET Set the date and time External clock settingSummer time begins Summer time ends Example Set to Flashes Default setting isDetecting connected cameras Quad Setting camera titlesExample Setting the title HALL-1STFL for Camera No Example Setting 26 October as a holiday Setting holidaysHoliday SET screen is displayed Default setting is Turn the jog dial to select H Set the day and month for item Setting time periods „ Masking camera video using a gray pattern „ Setting automatic selection of camera video„ Alarm recording using motion sensors Operations during the specified time periods Example 1 Setting periods using Time Period a Timer period settingsSet the time for T-1 Set the time for T-2 Cursor moves to Time Period a Timer period operations settingsTime Period a flashes Record SET Setting based on recording days Normal recording easy setupAlarm Operation SET JP.102 Makes settings for Record SET Example Timer recording from 8 AM to 8 PM Set the time for timer recording Example on Setting based on recording rateTurn the shuttle dial counter-clockwise REC Rate Base 25 FPS/CAM Recording Area SET screen is displayed Displaying the recording areasDisplays the total capacity of the hard disk Hard disk capacity Example Setting the recording area to 50% „ Default hard disk settingsChanging recording areas Turn the jog dial to select YES Recordings can now be made to the recording area Setting overwrite permission ‹ON Setting recording conditionsOFF Auto Alarm 01-01-05 000000 REC 5% EN a Alarm‹MANUAL Copy Copy Setting auto deleting Setting normal recording Default setting OFF „ Setting the picture quality for each cameraFPS flashes Allowable Example P-1 Setting program recordingProgram Select Individual Camera Rate Flashes for Program Program REC SET screen is displayedCursor moves to 01 under Select Individual Camera Rate FPS Recording rate is not set Timer setting items Timer settings Indicating the hour from Start flashes Setting the Start and Stop timeOFF flashes for SET Cursor appears in the bottom line „ To change a setting item Use the same procedure to set other itemsTo cancel all set timer reservations EXT Timer recordings spanning more than 24 hours Make settings in the Week and Start columnsSAT in the Week column flashes Line OFF 5FPS Timer recording using an external timer Cursor moves to line Setting timer recording To set alarm recording Setting alarm recording Only flashes Cursor moves to Alarm Interleave ‹ONLY Number of alarms Alarm display To set pre-alarm recordingCursor moves to PRE-ALARM Recording Pre-alarm recording is enabled Pre-alarm recording is disabledFlashes Default setting 12.5FPS Cursor moves to Alarm Trigger Number of alarms Setting alarm triggersUse this setting to indicate how alarms are to be detected PRE display Level Setting the motion sensors 100 Use the same procedure to set other sensor positionsTurn the jog dial to select a or B Turn the shuttle dial clockwise twice Setting sensitivity levels Setting time periodsSetting sensor modes 101 102 Setting alarm operation and display„ To stop motion sensor recording To B 103 104 105 Canceling an alarm General SET RS-232C/RS-485 SET JP.115 Makes settings when106 HDD SET JP.117 General SET Setting data display107 On flashes for Video Loss Setting display for video loss108 109 Setting the buzzer 110 Setting the security lock ‹NORMAL 111Change LV4 112 Setting user ID„ User level and privileges Registering a user Turning on the key lock, password lock and network lock Enter a password113 Enter a user ID Enter the user ID and password During password lock, press114 Confirm the lock status 115 Setting RS-232C and RS-485RS-232C/RS-485 SET screen is displayed RS-485 flashes 116 117 Setting mirroringHard disk initialization and mirroring Initializing the hard disk ‹MASTER 118 Expanding Replacing and initializing the hard disk Switching playback disks119 Making network settings Network settingsSwitch 120 Set IP Address 121Set Subnet Mask Set Gateway Set Http Port 122 123 Making network control settings 124 125 Setting user„ User levels and privileges LV1 LV2 LV3 LV4 126 Setting quad and multi 9/16 displayScreen SET Checking modified screen positions 127Screen SET Screen SET screen is displayed 1281S flashes for Full Automatic selection is set to an interval of 5 seconds MAIN/MON.2 Monitor SET screen is displayed 129Flash for Time Period Cursor moves to 1S for 01 and Main MON ‹ 1S 30S Switching interval seconds Setting masks130 Channel not displayed 131 Use the same procedure to set other channels Settings The default setting is Setting the color level132 Color Level SET screen is displayed Select Used Time and then turn the shuttle dial clockwise Power LOSS/USED Time133 134 Initialization LOGArea Action Saving menu settings Copy Menu SettingsCopy Menu Settings screen is displayed Jog dial 135 Loading menu settings Copy Menu SettingsCopy Menu Settings screen is displayed 136 Use the following procedure to copy recording area settings Copying the recording area settings137 Cursor appears on Save Menus to CF 138 Advanced Menu SET Setting the ROI Setting ROI139 Advanced Menu SET 140 Response sensitivity is enabled. Lower Response sensitivity is disabledSet Time LAG to OFF when Level is set English 141 142 Setting ROI areasNo operation after the response-stop 1S 10S Set the areas in frame 2 and frame 3 in the same way 143Cursor moves to the bottom right Cursor the orange † moves to the top left of frame 144 Setting alarm notification 145 Camera control settingsSanyo COAX1 Sanyo Coax Sanyo RS485 BBV Coax Pelco Coax Sanyo COAX2 146 147 Making PPP settingsClick the buttons to operate the camera Operating the camera with the digital video recorder 148 149 Time zone/NTP settingTime Zone SET / NTP SET screen is displayed GMT Dublin, Lisbon, London flashes Set NTP Server Address 150Set Time to Synchronize ExamplePage Manual for Remote Operation by Network Connection Getting Prepared Digital video recorder network settings153 Operations possible with PC control Getting Prepared 154Click the Security tab Click Custom Level Click Network Connections 155Click Properties Click OK Controlling from a PC Network Control156 Messages displayed when connected Disconnecting157 Select a language and click OK Display on the PC „ When disconnected from the network „ When control rights are switched to the unit„ When network settings are changed 158 Operation panel 159 Camera operation panel 160Operation Panel Functions and Restrictions Finishing dome camera operation 161 162 Recording ImagesClick the button on the operation panel Stopping normal recording Various ways of displaying live images Watching Images163 Watching Images Performing operations in play mode164 165 Adjusting the image and audio Alarm Recording Mode Normal Recording Mode166 Screen display items Downloading live images to a PC 167 168 When saving is completed, click OK on the pop-up window„ To cancel a save operation 169 Search for video using the search mode screenBasic operation Search menu 170 Searching for Recorded Video Alarm LOG Search 171 Searching for Recorded Video Alarm SearchAlarm Thumbnail Search Searching for Recorded Video TIME/DATE Search 172Archive Area Search Click 4. TIME/DATE Search on the Search screen Searching for Recorded Video Motion Detection Search 173Click 6. Motion Detection Search on the Search screen Specify the search area from the Search from pull-down menu Copying to the archive area 174Click Button on the operation Panel Enter the number of images for HOW Many Downloading to a PC 175 Displays the download results 176 177 SettingsMaking menu selections Click a menu on the Main Menu Menu structure 178 Summer Time SET/EXT. Clock SET 179Clock SET Holiday SET 180Click Save Click 3. Holiday SET Recording Area SET 181Click 2. Record SET Click 1. Recording Area SET Recording Conditions SET 182 183 Record SET Normal REC Mode SET Program REC SET 184Set REC Program Group to the desired program group Click 4. Program REC SET 185 Record SET Timer SETClick 5. Timer SET Click 6. Alarm REC Mode SET Record SET Alarm REC Mode SETSet Alarm Recording to the desired recording mode Setting alarm recording Set Duration to the desired alarm recording duration Set Alarm Interleave to the desired recording patternSet PRE-ALARM Recording to on or OFF 187 Alarm or Set Duration to the desired pre- alarm recording duration188 15MIN Buzzer SET 189Display SET 190 To cancel the buzzer setting on the PCSecurity Lock SET Click 3. Security Lock SET Settings Description Level Set user ID for User ID Set Password Set user level for LV191 General SET User ID SET RS-232C/RS-485 SET 192HDD SET Click 5. RS-232C/RS-485 SET 193 Change the settings as requiredNetwork SET Click 7. Network SET Network Control SET 194Click 8. Network Control SET Set Network Status to on or OFF 195 Sequence SET 196 Screen SET Mask SET 197Click 2. Mask SET Set the following functions as required 198 Power LOSS/USED TimeClick 5. Power LOSS/USED Time Click 6. Initialization LOG 199Initialization LOG Loading Menu Settings Saving Menu SettingsClick 7. Copy Menu Settings 200 Click 1. Alarm Notice SET Alarm Notice SETSet Alarm Notice to on 201 Camera Control SET 202PPP SET Click 2. Camera Control SET NTP SET 203 204 Setting is saved Click Renewal to manually update the timeClick 4. Time ZONE/NTP SET Set Time Zone DVR VIEWER2 Installing DVR Viewer2205 Operating environment DVR VIEWER2 206Opening and closing DVR Viewer2 Opening DVR Viewer2 Opening files 207Click OpenO on the FileF menu Click Browse... to display the folder tree Viewing images 208Main window Thumbnail window TOP 209Prev Rplay Printing images 210 RS-485 specifications Interface SpecificationsRS-232C specifications 211 212 Interface SpecificationsDVR/VCR command table Jpeg Specifications213 214 Specifications DimensionsUnits mm 420 215 Specifications Table of recording rates and times 216 Recording rates that cannot be selected English Specifications Table of recording rate settings217 218 Specifications Table of pre-alarm recording times 219 Specifications Terminal board specifications 220 221 Menu Setting SequenceRecord SET →P.71 Recording Area SET →P.77 Power LOSS/USED Time → P.133 Menu Setting Sequence222 Network SET →P.120 223 Alarm Notice SET →P.144Initialization LOG →P.134 Dial UP SET →P.148 224 SymbolsIndex 112, 125 225Index L8HBD/XE, L8HBF/XE 0405TR-SY