Sanyo DSR-5009P instruction manual 213, Specifications, Jpeg

3Specifications

Specifications

Product name		Digital video recorder with multiplexer function
Product number		DSR-5016P (16 channels), DSR-5009P (9 channels)
Hard disk capacity		Can be expanded using 80, 160, 250 or 300 GB hard disk (sold separately)
Television system		Conforms to PAL format
Image compression		M-JPEG
Picture resolution		720 x 288 (fields)
Recording type		Field recording
Picture quality		5 levels (Basic, Normal, Enhanced, Fine, Super Fine)
Recording rate		28 levels (100 to 0.033 FPS)
Recording areas		Recording area, Archive area
Magnification		x2 digital zoom using the [ZOOM] button
Search modes		Alarm log search, Time/date search, Alarm search, Alarm thumbnail search,
		Archive area search, Motion detection search
Date/clock settings		Day, Month, Year (last two digits), Hours, Minutes, Seconds
Date and time positions		2 position; upper and lower (display may also be turned off)
Camera title display		Each channel; up to 10 alphanumeric characters and symbols (display may also be turned off)
Memory backup		Approximately 30 days (for 48 hours of electrification)
Video input terminal		VBS/VS 1.0 V (p-p), 75 Ω, BNC (DSR-5016P: x16, DSR-5009P: x9)
Video output terminal		Through output of each video input, BNC (DSR-5016P: x16, DSR-5009P: x9)
Main monitor output terminal		VBS 1.0 V (p-p), 75 Ω, BNC (x1)
Main monitor S-VIDEO output		S-terminal
Monitor 2 output terminal		VBS/VS 1.0 V (p-p), 75 Ω, BNC (x1)
Audio input terminal		−8 dBs, 27 kΩ, unbalanced RCA (x2)
Audio output terminal		−8 dBs, 600 Ω, unbalanced RCA (x1)
Microphone input terminal		−60 dBs, 10 kΩ, unbalanced 3.5 mm pin jack (x1)
CompactFlash card slot		CompactFlash Type 2 (front panel) (x1)
	LAN terminal	10BASE-T/100BASE-TX, RJ-45 (x1)
		Compatible protocol: UDP, TCP/IP, HTTP server, NTP, SMTP, DHCP, PPP
	RS-485/422 terminal	RJ-11 (x2) (with a termination switch)
	RS-232C terminal	Dsub-9 pin
	USB terminal	Internal USB 2.0 x 2 (front terminal prioritized)
	Remote control input terminal	Two-wire voltage control (x2)
	Alarm input terminals	No-volt contacts (with a pulse width of 100 ms or more) (DSR-5016P: x16, DSR-5009P: x9)
	Alarm output terminal	Active Low, Open collector Max. 500 mA (x1)
	Sensor alarm output terminals	Open collector, Low level active (Max. 25 mA) (DSR-5016P: x16, DSR-5009P: x9)
Terminals
	Alarm reset input terminal	No-volt contacts (with a pulse width of 100 ms or more) (x1)
	Non rec out terminal	Normal 5V DC, Low level active (x1)
	Clock adjust input terminal	No-volt contacts (with a pulse width of 100 ms or more) (x1)
	Clock adjust output terminal	Normal 5V DC, Low level active (x1)
	Warning output terminal	Normal 5V DC, Low level active (x1)
	Normal recording area disk full	Normal 5V DC, Low level active (x1)
	warning output terminal
	Archive area disk full warning	Normal 5V DC, Low level active (x1)
	output terminal
	External timer input terminal	No-volt contacts (with a pulse width of 100 ms or more) (x1)
Expandable slot		Option SCSI board (Ultra 160 SCSI)
External storage unit		External storage unit connection terminal x 4
Power supply voltage		120 to 240 V AC, 50/60 Hz
Current consumption		680 mA
Allowable operating temperature		5 – 40ºC
Allowable operating humidity		10 – 80%
Dimensions		420 (W) x 86 (H) x 364.5 (D) mm (Not including protruding areas or rubber pads)
Weight		6 kg without HDD, 6.6 kg with HDD, 7.2 kg with 2 HDDs
Accessories		Power cord (x1), Core clamp x4 (large), x2 (small), Power cord tie (x1)

Note that product appearance and specifications are subject to change without prior notice.

English 213